Open tablet driver osu

03.09.202203.09.2022 admin 0 Comments

Open tablet driver osu

This is the 20th release of OpenTabletDriver!

We have changed a massive amount of things since v0.5.3.3, most of which has been in part of adding support for multiple concurrent tablets.

Changelog

As there were so many changes to the driver as this release came to be (over 1000 commits), I’ve decided to shorten this changelog into a summary.

Thanks to Parblo for providing tablets to our development team!

All supported tablets can be found here

The full changelog can be found here

Contributors

Thanks to everyone who made this release happen!

Downloads

Visit https://opentabletdriver.net/ for installation instructions.

OpenTabletDriver v0.5.3.3

This is the 19th release of OpenTabletDriver!

This is a service update to fix some UI performance issues.

Major updates coming soon! Check out our development builds if you want the latest and greatest.

Open tablet driver osu

This is most commonly the result of manufacturer driver leftovers.

Teleporting cursor position

This occurs because another tablet driver is sending input. To resolve this, uninstall all other tablet drivers on your computer, then replug your tablet.

Input does not work in osu!

Disable Map raw input to osu! window in the ingame settings.

OpenTabletDriver has since v0.4.0 supported Raw Input as it uses the Windows SendInput API to position the cursor.
Therefore, it is not necessary to disable raw input itself.

Windows Ink pressure support

OpenTabletDriver has many plugins that implement different features. WindowsInk is one of these plugins, as given in the plugins name, it allows for use of the Windows Ink pressure api. To use it, follow below.

Note: Recently, a change in Windows made it so Windows Ink’s and normal Mouse’s cursor position is handled separately. This makes it so your cursor will appear to «jump» when switching from tablet to mouse while using Windows Ink output modes. This is not a bug of OpenTabletDriver but rather one of Windows.

Stuck at connecting to Daemon

This is usually caused by one of two things. Either you didn’t follow the installation guide correctly or the settings file is corrupted. To remedy this case follow this below.

Open at startup

Starting OpenTabletDriver at login can be performed quite easily. This can be done for nearly any program, although there may be better ways to do it for those programs.

Starting OpenTabletDriver minimised can also be done by changing the properties of a shortcut. To do this, right click the OpenTabletDriver shortcut, go to properties > run > minimised.

OpenTabletDriver gives an Administrator warning

When Starting OpenTabletDriver you may get an error warning you about Administrator Permissions. OpenTabletDriver shouldn’t be run as Administrator. This causes the plugin manager, FAQ page and Tablet debugger to not work along with other features.

If this does not solve the issue, check that you are not using the «Administrator» named account as it overrides User Account Control.

Blank window or crashing when opening OpenTabletDriver

This can be caused by RivaTuner Statistics Server attempting to hook onto OpenTabletDriver, preventing the UX from responding due to failed hooks. If you use this application, make sure it doesn’t hook onto OpenTabletDriver.

Using VMulti to play Valorant

Vanguard (Valorants anticheat) requires a workaround to play Valorant with a tablet. As it requires Kernel level input you can use VMulti to mitigate some of the restrictions that Vanguard uses to stop tablet use. However, there will still be some restrcitions due to you not playing with a physical mouse.

Vanguard Quirks:
As VMulti is considered a separate input source from an actual physical mouse, Vanguard imposes several limitations to it.

There is no fix this, as even Logitech G Hub, Razer Synapse, HawkuTD, DevocubTD, and even XP-Pen, Huion, Gaomon, Veikk drivers are affected without exceptions. As long as the input source is not a real physical mouse, Vanguard will impose such quirks intentionally.

OpenTabletDriver/OpenTabletDriver

Use Git or checkout with SVN using the web URL.

Work fast with our official CLI. Learn more.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching Xcode

If nothing happens, download Xcode and try again.

Launching Visual Studio Code

Your codespace will open once ready.

There was a problem preparing your codespace, please try again.

Latest commit

Git stats

Files

Failed to load latest commit information.

README.md

OpenTabletDriver is an open source, cross platform, user mode tablet driver. The goal of OpenTabletDriver is to be cross platform as possible with the highest compatibility in an easily configurable graphical user interface.

All statuses of tablets that are supported, untested, and planned to be supported can be found here. Common issue workarounds can be found in the wiki for your platform.

Running OpenTabletDriver binaries

Building OpenTabletDriver from source

The requirements to build OpenTabletDriver are consistent across all platforms. Running OpenTabletDriver on each platform requires different dependencies.

Run build.ps1 to produce binary builds to ‘bin’ folder. These builds will run in portable mode by default.

Required packages (some packages may be pre-installed for your distribution)

To build on Linux, run the provided ‘build.sh’ file. This will run the same ‘dotnet publish’ commands used for building the AUR package, and will produce usable binaries in ‘OpenTabletDriver/bin’.

To build on ARM linux, run the provided ‘build.sh’ file with the appropriate runtime provided as an argument. For arm64, this is ‘linux-arm64’.

Note: If building for the first time, run the included generate-rules.sh script. This will generate a set of udev rules in OpenTabletDriver/bin, called ’99-opentabletdriver.rules’. This file should then be moved to /etc/udev/rules.d/ :

No other dependencies.

Contributing to OpenTabletDriver

If you wish to contribute to OpenTabletDriver, check out the issue tracker. When creating pull requests, follow the guidelines outlined in our contribution guidelines.

If you have any issues or suggestions, open an issue ticket and fill out the template with relevant information. We welcome both bug reports, as well as new tablets to add support for. In many cases adding support for a new tablet is quite easy.

For issues and PRs related to OpenTabletDriver’s packaging, please see the repository here.

For issues and PRs related to OpenTabletDriver’s web page, see the repository here.

Supporting a new tablet

If you’d like us to add support for a new tablet, open an issue or join our discord asking for support. We generally prefer that adding support for a tablet be done through discord, due to the back-and-forth involved.

We’ll have you do a few things like making a recording of the data sent by your tablet using our built-in tablet debugging tool, testing features of the tablet (on-tablet buttons, pen buttons, pen pressure, etc) with different configs we’ll send you to try.

You’re also of course welcome to open a PR adding support for it yourself, if you have a good grasp on what’s involved.

Generally this process is relatively easy, especially if it’s for a tablet manufacturer we already have support for on other tablets.

OpenTabletDriver

Pinned

Open source, cross-platform, user-mode tablet driver

ASP.NET Core site for OpenTabletDriver

Plugin repository source for OpenTabletDriver plugins

Open source, cross-platform, user-mode tablet driver

50 Updated Aug 28, 2022

OpenTabletDriver packaging scripts

3 Updated Jul 9, 2022

ASP.NET Core site for OpenTabletDriver

6 Updated Jun 22, 2022

Plugin repository source for OpenTabletDriver plugins

1 Updated May 26, 2022

TabletDriver Filters ported to OpenTabletDriver

0 Updated May 21, 2022

1 Updated Mar 4, 2022

Tool to create udev rules used in OpenTabletDriver

1 Updated May 4, 2021

Installer for OpenTabletDriver

1 Updated Mar 30, 2021

People

Top languages

Most used topics

Footer

You can’t perform that action at this time.

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.

Open tablet driver osu

Copy raw contents

All statuses of tablets that are supported, untested, and planned to be supported can be found here. Common issue workarounds can be found in the wiki for your platform.

Running OpenTabletDriver binaries

Building OpenTabletDriver from source

The requirements to build OpenTabletDriver are consistent across all platforms. Running OpenTabletDriver on each platform requires different dependencies.

Run build.ps1 to produce binary builds to ‘bin’ folder. These builds will run in portable mode by default.

Required packages (some packages may be pre-installed for your distribution)

To build on ARM linux, run the provided ‘build.sh’ file with the appropriate runtime provided as an argument. For arm64, this is ‘linux-arm64’.

No other dependencies.

Contributing to OpenTabletDriver

If you wish to contribute to OpenTabletDriver, check out the issue tracker. When creating pull requests, follow the guidelines outlined in our contribution guidelines.

For issues and PRs related to OpenTabletDriver’s packaging, please see the repository here.

For issues and PRs related to OpenTabletDriver’s web page, see the repository here.

Supporting a new tablet

You’re also of course welcome to open a PR adding support for it yourself, if you have a good grasp on what’s involved.

Generally this process is relatively easy, especially if it’s for a tablet manufacturer we already have support for on other tablets.

Open tablet driver osu

Copy raw contents

OpenTabletDriver — кроссплатформенный драйвер с открытым исходным кодом для графических планшетов. Целью проекта является поддержка максимального числа устройств и платформ, а также создание простого и удобного интерфейса для настройки драйвера.

Статус поддержки различных моделей можно найти по этой ссылке.

Возможные типы статуса поддержки:

Решения возможных типичных проблем указаны в разделе вики используемой платформы.

Запуск и использование OpenTabletDriver

Сборка OpenTabletDriver из исходников

Требования к сборке OpenTabletDriver одинаковы для всех платформ, но для запуска на разных платформах OpenTabletDriver может иметь дополнительные зависимости.

Нет дополнительных зависимостей.

MacOS [Экспериментальная поддержка]

Нет дополнительных зависимостей.

Функции и особенности

Помощь в разработке OpenTabletDriver

Если вам хочется помочь с разработкой драйвера, то актуальные проблемы можно найти здесь.

Если у вас возникли проблемы, появились пожелания или предложения, откройте новый тикет.

Open tablet driver osu

Device is currently in use

This occurs typically due to the hid_uclogic kernel module taking priority over OpenTabletDriver.

The modules reload after rebooting?

The solution to this is to rebuild the initramfs. This process varies distro to distro.

Debian / Ubuntu

Failed to open device streams

This occurs due to a lack of permissions to open a device stream. It is resolved by creating udev rules that give these permissions.
If you installed OpenTabletDriver via your package manager, you may need to run the following command then replug your tablet.

If this does not work, run the following commands

Failed to initialize virtual device

EACCESS

This occurs usually when the udev rules are not correct, or haven’t been reloaded. Make sure your rules are correct by heading here.

If the commands above do not resolve your issue, reboot.

ENODEV

Rebooting is the only option here. Your kernel was very likely updated, or some component of uinput was modified which requires a reboot to resolve.

This doesn’t work after rebooting?

This is probably due to your kernel not having uinput built in, either build your kernel with uinput support or use a different kernel.

Poor performance with NVIDIA

Stuck cursor in osu!lazer (Wayland)

CTL-x100 is not detected

CTL-x100 tablets boots in Android mode instead of PC mode in some rare cases. To fix this, press the outer 2 express keys for 3-4 seconds until the LEDs change brightness. This toggles the tablet’s operating mode between PC (high LED brightness) and Android mode (low LED brightness).

X11/Wayland Session not detected

X11 (systemd)

Wayland (systemd)

Enabling pressure using Artist Mode

Pressure support is availible by changing the output mode of OpenTabletDriver to Artist Mode. To do this, follow below.

hawku/TabletDriver

Use Git or checkout with SVN using the web URL.

Work fast with our official CLI. Learn more.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching Xcode

If nothing happens, download Xcode and try again.

Launching Visual Studio Code

Your codespace will open once ready.

There was a problem preparing your codespace, please try again.

Latest commit

Git stats

Files

Failed to load latest commit information.

README.md

This is a low latency graphics tablet driver that is meant to be used with rhythm game osu!

This driver has not been updated for latest Windows versions!

Please, use OpenTabletDriver:

About

Topics

Resources

License

Stars

Watchers

Forks

Releases 13

Packages 0

Contributors 7

Languages

Footer

You can’t perform that action at this time.

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.

yajpersonalproject / TabletDriver Goto Github PK

This project forked from hawku/TabletDriver

TabletDriver Download: http://hwk.fi/TabletDriver/TabletDriverV0.2.3.zip

License: GNU General Public License v3.0

C# 49.50% C++ 49.98% C 0.21% Batchfile 0.30%

TabletDriver’s Introduction

This is a low latency graphics tablet driver that is meant to be used with rhythm game osu!

Currently the driver only works when the TabletDriverGUI is running.

The GUI minimizes to system tray / notification area. You can reopen the GUI by double clicking the system tray icon.

If you have problems with the driver, please read the FAQ:

Supported operating systems:

Configured, but not properly tested:

You might need to install these libraries, but usually these are already installed:

Unzip the driver to a folder (Shorter path is recommended, for example C:\Temp\TabletDriver )

Uninstall all other tablet drivers. If you have problems with uninstalling the Wacom drivers, check the GitHub issue #1

Start the TabletDriverGUI.exe

Updating to a new version

VMulti and Huion driver binaries

If you want to compile the code and don’t want to install anything from the TabletDriver binary package, you will need extract the missing drivers from these installation packages:

VMulti driver:

Huion WinUSB driver:

MaxKruse/TabletDriver

Use Git or checkout with SVN using the web URL.

Work fast with our official CLI. Learn more.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching Xcode

If nothing happens, download Xcode and try again.

Launching Visual Studio Code

Your codespace will open once ready.

There was a problem preparing your codespace, please try again.

Latest commit

Git stats

Files

Failed to load latest commit information.

README.md

Fork for additional Development

This repository is a fork from InfinityGhost, as he deprecated his fork for another OpenSource variant of a tablet driver.

This is a low latency graphics tablet driver that is meant to be used with rhythm game osu!

Currently the driver only works when the TabletDriverGUI is running.

The GUI minimizes to system tray / notification area. You can reopen the GUI by double clicking the system tray icon.

If you have problems with the driver, please read the FAQ:

Supported operating systems:

Configured, but not properly tested:

Updating to a new version

The easiest way to build TabletDriver is to use the included powershell script build.ps1

If you want to compile the code and don’t want to install anything from the TabletDriver binary package, you will need extract the missing drivers from these installation packages:

VMulti driver:

Huion WinUSB driver:

7-zip x64 (optional):

About

Fork of InfinityGhost’s TabletDriver fork from hawku, as it is deprecated

OpenTabletDriver/TabletDriverFilters

Use Git or checkout with SVN using the web URL.

Work fast with our official CLI. Learn more.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching Xcode

If nothing happens, download Xcode and try again.

Launching Visual Studio Code

Your codespace will open once ready.

There was a problem preparing your codespace, please try again.

Latest commit

Git stats

Files

Failed to load latest commit information.

README.md

TabletDriver Filters ported to OpenTabletDriver

About

TabletDriver Filters ported to OpenTabletDriver

Resources

License

Stars

Watchers

Forks

Releases 4

Packages 0

Contributors 5

Languages

Footer

You can’t perform that action at this time.

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.

Add Huion H420 support #921

Comments

Devidovo commented Mar 25, 2021

Other drivers act strangely on my tablet and this is the lats driver that i need to check for compatability because my tablet wack

The text was updated successfully, but these errors were encountered:

Mrcubix commented Mar 25, 2021 •

Your tablet will only work on linux since it possess a firmware revision that doesn’t allow us to detect and be able to use it on windows

peppy commented Mar 29, 2021

@Mrcubix for the record can you explain this further? what part of the driver stops it from being detected? is this something common across all h420s?

X9VoiD commented Mar 29, 2021 •

We refer to these tablets as HVAN tablets. (Device strings are filled with HVAN)

Affected tablets are H420, 420, some revisions of New 1060 Plus, and others that I might have forgotten.

All of the exposed endpoints/interfaces for device is exclusively opened by Windows, rendering us unable to access the tablet. The OEM driver gains access to it by installing WinUSB on top of the target endpoint (which prevents Windows from opening the handle to the device exclusively)

Before, we encountered many problems about unaccessible tablets. Due to that, this PR was developed and determines in advance if the device is going to be opened exclusively. It is based on Microsoft’s documentation.

peppy commented Mar 29, 2021

Seems quite familiar in my recollection of dealing with these. I still have a firmware flasher and some various firmwares for 420s, so I might take a look and see if we can arrive on a better default firmware for use with these.

AbstractQbit commented Mar 29, 2021

@peppy h420 and a bunch of other older tablets don’t have the instruction to turn on vendor defined mode. Without that mode on modern windows versions the hidclass driver opens it exclusively for system, so nothing else can read from it. Vendor drivers get around that by swapping hidclass for winusb filter driver, but OTD doesn’t support winusb yet (the lib we use only supports hid).

AbstractQbit commented Mar 29, 2021

Oops, was typing too slow and didn’t see Void’s reply

X9VoiD commented Mar 29, 2021 •

Oh, uh, I linked the wrong documentation, my bad. Here’s the documentation that was actually used as reference in the CanOpen thing, just in case that other people also check the issue.

OpenTabletDriver / OpenTabletDriver Goto Github PK

Open source, cross-platform, user-mode tablet driver

License: GNU Lesser General Public License v3.0

OpenTabletDriver’s Introduction

All statuses of tablets that are supported, untested, and planned to be supported can be found here. Common issue workarounds can be found in the wiki for your platform.

Running OpenTabletDriver binaries

Building OpenTabletDriver from source

The requirements to build OpenTabletDriver are consistent across all platforms. Running OpenTabletDriver on each platform requires different dependencies.

Run build.ps1 to produce binary builds to ‘bin’ folder. These builds will run in portable mode by default.

Required packages (some packages may be pre-installed for your distribution)

To build on ARM linux, run the provided ‘build.sh’ file with the appropriate runtime provided as an argument. For arm64, this is ‘linux-arm64’.

No other dependencies.

Contributing to OpenTabletDriver

If you wish to contribute to OpenTabletDriver, check out the issue tracker. When creating pull requests, follow the guidelines outlined in our contribution guidelines.

For issues and PRs related to OpenTabletDriver’s packaging, please see the repository here.

For issues and PRs related to OpenTabletDriver’s web page, see the repository here.

Supporting a new tablet

You’re also of course welcome to open a PR adding support for it yourself, if you have a good grasp on what’s involved.

Generally this process is relatively easy, especially if it’s for a tablet manufacturer we already have support for on other tablets.

OpenTabletDriver’s People

Contributors

Stargazers

Watchers

Forkers

OpenTabletDriver’s Issues

OSX: Fails to get cursor position and set cursor position

Description

OSX fails to get cursor position and set cursor position

System Information:

Option	Value
Operating System	macOS Mojave 10.14.5

Multiple MainWindows appear on startup

Description

Multiple MainWindows appear on startup
Edit: This only occurs when default settings are used.

System Information:

Option	Value
Operating System	Windows 10
Software Version	0.1.0-781f731
Tablet	N/A

First startup puts areas at 0,0

Description

Areas aren’t centered on first startup.

Hey there I’m using an XP PEN G640 tablet, doesn’t seem to work for me :/

I don’t know if the fact that I have this tablet can be any helpful to you, I appreciate that you are working on this driver and wish you the best through this process.

I have installed the digimend drivers before trying this one out, maybe they are mutually incompatible?

(Kind of new to this git hub thing, not sure if this is the right place)

Configuration overall does nothing (gaomon s620)

Description

Configuration overall does nothing.
uninstalled the OEM drivers, rebooted, the tablet work, this tool now detect my tablet, but when i edit anything, it just doesn’t work after applying them.
It’s possible however that i’m missing some step in the driver installation, cause you had to install a vmulti driver with the hawku one’s

System Information:

Option	Value
Operating System	Windows 8.1 x64
Software Version	0.20—rc1
Tablet	Gaomon s620

Incorrect clipping with absolute mode.

Description

Tablet area clipping goes out of bounds (to the screen it’s not supposed to go) with an area

Incorrect report ID on CTH-690

Description

Incorrect report ID, resting is 29

System Information:

OSX: Displays are limited to the main display

Description

Displays are limited to the main display, hard coded that way.

System Information:

Option	Value
Operating System	macOS Mojave 10.14.5

Offset doesn’t line up with cursor positioning when a display is left of the main display

Description

Displays to the left of the main display are not being considered when the cursor is positioned, resulting in incorrect offset positioning.

System.InvalidOperationException on Settings Deserialization

Description

Settings serialization does not fully overwrite the file

Abnormal CPU usage when tablet is (dis)connected after startup

Description

After opening OpenTabletDriver without a tablet connected, manually connecting it afterwards will cause the CPU usage to jump to 100% and persist until closed.
Opening OpenTabletDriver with a tablet connected and disconnecting the tablet afterwards will also cause the same issue.

System Information:

Option	Value
Operating System	Arch Linux
Software Version	0.1.0-4eff49e4
Tablet	Gaomon S620

Windows: Display Size Improperly Calculated

Description

Display size is dependent on monitor count, width is added together and height is added together resulting in incorrect width and height on display area.

System Information:

CTH-470 only reads touch inputs

Description

CTH-470 is detected but only reads touch inputs.

System Information:

Option	Value
Software Version	git-master
Tablet	CTH-470

Error when clicking detect tablet and there’s no configuration directory

Can’t use my tablet in OneNote + no pen pressure in Photoshop

Description

Tablet works fine in Osu. I cannot use it in OneNote or Windows Ink Sketchpad as it detects it as mouse? and I cannot draw. It works in Photoshop except there is no pen pressure. How can I fix this? Or is it by design (that the drivers only work in osu)?

edit: I believe this is may be caused by the fact the Windows Ink is disabled in these drivers? If that’s the case, is there a way to disable/enable them by application (or to disable it for osu but enable it for everything else)?

System Information:

Option	Value
Operating System	Windows 10 x64
Software Version	0.2.0-rc1
Tablet	Gaomon S620

Veikk S640 Hoverheight might be set to a wrong value

Description

Using OTD with my Veikk S640, have to set hoverheight to 0-79 (79 being the highest value it works with) to have it work.

System Information:

Option	Value
Operating System	Windows
Software Version	latest git from the plugins branch
Tablet	Veikk S640

G640: Failed to open tablet.

Description

System Information:

——————|——————
Operating System | 10
Software Version | v0.2.0-rc1
Tablet | G640

App crash when there is no tablet connected

Description

When I open the application and there is no tablet connected it crashes.
Crash log

System Information:

Option	Value
Operating System	Windows 7 Ultimate 64 bits
Software Version	0.1.1-894eb0e
Tablet	Wacom CTH-470

Gaomon S620 Uses Different Input Report Length Than Configuration

the driver searched for tablets and didn’t find my s620 I tried researching and it failed again.

AreaSetter control fails to update settings (Avalonia Property Binding)

Binding fails from AreaSetter.xaml to AreaSetter.xaml.cs. When saving settings, it fails to write the changes from the AreaSetter control.

de-AIDS the zip

Pressing the pen onto the tablet stops mouse movement until the pen is lifted again

Description

Pressing the pen onto the tablet stops mouse movement until the pen is lifted again. I don’t even know if it’s a feature or a bug, because I suppose this is useful for people who use their pen like a computer mouse. It’s unwanted behavior for many other use cases though.

It would be good to be able to toggle this behavior.

System Information:

Option	Value
Operating System	Arch (Antergos) Linux x64, KDE
Software Version	v0.2.0-rc1
Tablet	Wacom PTH-451

Cancelling Save All in configuration manager throws ArgumentException

Description

Crash when cancelling Save All in configuration manager

b__0() at Avalonia.Threading.JobRunner.RunJobs(Nullable`1 priority) at Avalonia.Win32.Win32Platform.WndProc(IntPtr hWnd, UInt32 msg, IntPtr wParam, IntPtr lParam) at Avalonia.Win32.Interop.UnmanagedMethods.DispatchMessage(MSG& lpmsg) at Avalonia.Win32.Win32Platform.RunLoop(CancellationToken cancellationToken) at Avalonia.Threading.Dispatcher.MainLoop(CancellationToken cancellationToken) at Avalonia.Controls.ApplicationLifetimes.ClassicDesktopStyleApplicationLifetime.Start(String[] args) at Avalonia.ClassicDesktopStyleApplicationLifetimeExtensions.StartWithClassicDesktopLifetime[T](T builder, String[] args, ShutdownMode shutdownMode) at OpenTabletDriver.Program.Main(String[] args)1/12/2020 2:41:23 AM: System.ArgumentException: The path is empty. (Parameter ‘path’) at System.IO.Path.GetFullPath(String path) at OpenTabletDriver.ViewModels.ConfigurationManagerViewModel.SaveAll() at System.Threading.Tasks.Task.<>c. b__139_0(Object state) at Avalonia.Threading.AvaloniaSynchronizationContext.<>c__DisplayClass5_0.

System Information:

Option	Value
Operating System	Windows 10
Software Version	`a4e0cfd`

Tablet Area and Display Area Settings not being applied

Description

CTH 470 is being detected according to the console logs however when changing the tablet area on the software and applying the settings, tablet area does not change regardless of the console logs saying that the settings that I had configured had been applied.

Also, I have tried changing the display area and that setting is not applied as well when testing it out with my tablet.

System Information:

Operating System | Ubuntu 18.04.3 LTS (Bionic Beaver)
Software Version | v0.1.0-rc1
Tablet | CTH 470

Reset to default doesn’t refresh theme

Description

Resetting to default doesn’t refresh theme

Driver output doesn’t position cursor with driver enabled

Description

System Information:

Option	Value
Operating System	Windows 10
Software Version	v0.1.0-rc1
Tablet	XP-Pen Deco 01 v2

Windows: Wacom Tablet Driver being installed causes detection to fail

Description

When the Wacom driver is installed, tablet detection fails.

System Information:

Option	Value
Operating System	Windows 10
Tablet	Wacom CTL-480

Windows: Clicking «Repository» textbox in About Window Win32Exception

Description

Crash on click repository in About

System Information:

Option	Value
Operating System	Windows 10
Software Version	0.1.0-a3f477
Tablet	Wacom CTL-480

Add the need to unload the «wacom» driver to the Linux wiki

Description

You can also add a blacklist rule in /etc/modprobe.d/

System Information:

Option	Value
Operating System	Linux
Software Version	v0.1.0-rc1
Tablet	CTL-480

gaomon s620 ubuntu

can i install drivers on gaomon s620 on ubuntu 18.04 using your opentabletdriver?

Windows: Displays to left of main display are not shown

Description

Displays to the left of the main display are not included.

System Information:

Option	Value
Operating System	Windows 10
Software Version	0.1.0-0cfde57

OTD does not detect Gaomon S620 under Pop!OS 20.04 LTS

Description

Hello,
i tried to run OTD under my installation of PopOS two ways :

The second one, through the artifact linked below, which didn’t worked either. First, i had to run the daemon with sudo, but it always spat out this error :

Launching the GTK, i tried to detect my tablet, but it spat out this error :
[Normal:Detect] Configuration directory ‘/home/myuname/Téléchargements/OTD/OpenTabletDriver.Daemon/bin/Release/netcoreapp3.1/linux-x64/publish/Configurations’ does not exist.
even though my Configurations folder exists at this path.

System Information:

cursor glitched

Description

the cursor sometime glitch
i cant fc any song ;(
https://youtu.be/fHUvO4to5hk

System Information:

Option	Value
Operating System	Windows 10 Home
Software Version	0.2.0—rc1
Tablet	Wacom CTL-471

HidDeviceStream fails to open: Wacom CTL-480 on Windows

CTL-480 not detected when using a USB extension cable

Description

When I put the extension cable in, connection goes bye-bye.

System Information:

Option	Value
Operating System	Arch Linux x86_64 running gnome-xorg
Software Version	0.1.0? latest from AUR
Tablet	CTL-480

[CTL 470] Tablet not found (Linux)

Description

The tablet isnt detected.

Once it gets to the correct tablet, i get following error:

[Time] | DeviceIOException | Unable to open HID class device (OK)

System Information:

Option	Value
Linux Manjaro	18.1.5 KDE Plasma / 5.4.13-3-MANJARO
Software Version	0.1.0-rc1
Tablet	CTL 470

Add the ability to select a single screen.

Description

In dual monitor systems, you have to play with the size/offset X to get a proper tablet area. Would be nice if there could be an option to map the output to a single screen just like in the mainline wacom driver.

Add Status Bar Icon

Description

Status bar icon to hide and show the window, along with other various functions.

how to install it

yes i am stupid

It can’t detect XP-PEN G430S

Description

I started driver and clicked «detect» but it doesn’t work, terminal says «Can’t detect»

System Information:

Option	Value
Operating System	Manjaro XFCE 20
Software Version	v0.2.0 (aur version)
Tablet	XP-PEN G430S

Gaomon S620 Report Rate

Description

Using OpenTabletDriver I get constant 144hz on zowie’s mouse-rate-checker website (https://zowie.benq.com/ja/support/mouse-rate-checker.html). When using either the default Gaomon drivers or the fork of hawku’s TabletDriver, I get around 266hz. Unsure if this is intentional for OTD or bugged on my end. This hasn’t really affected my gameplay (maybe better/faster osu! players might notice it), but still curious on why this happens.

System Information:

Option	Value
Operating System	Windows 10
Software Version	OTD v0.2.0-rc1
Tablet	Gaomon S620

NullRef on DeviceReader.Dispose()

Description

Driver throws NullReferenceException on DeviceReader.Dispose()

System Information:

Arguments don’t function as intended

Description

Arguments don’t set the properties they’re supposed to.

System Information:

Mac OS X fails to be detected as Mac OS X platform

Description

OSX is detected as Unix, while not incorrect, isn’t the platform we need.

Star G640 Not Detected, Possibly new revision

Description

Star G640 Isn’t detected, aparently its a new revisio

System Information:

Operating System Windows 10
Software Version v0.2.0-rc1
Tablet G640

[Detect:Error] Failed to get device input report length on XP-PEN G640

Description

Tablet worked pretty much plug and play, but when I run the tablet driver, I get [Detect:Error] Failed to get device input report length. Visit the wiki (https://github.com/InfinityGhost/OpenTabletDriver/wiki) for more information. The tablet still moves, but absolutely unrelated to the driver.
The udev edit mentioned in the FAQ is done btw.

I’ve waited some time, and recorded everything on /var/log/Xorg.0.log. These are the tablet related outputs it gave me, in case that it helps I’m pasting it below.

[ 1260.014] (II) libinput: XP-PEN STAR G640 Pen: needs a virtual subdevice
[ 1260.014] () XP-PEN STAR G640 Pen Pen (0): Applying InputClass «libinput tablet catchall»
[ 1260.014] (II) Using input driver ‘libinput’ for ‘XP-PEN STAR G640 Pen Pen (0)’
[ 1260.014] () XP-PEN STAR G640 Pen Pen (0): always reports core events
[ 1260.014] () Option «Device» «/dev/input/event9»
[ 1260.014] () Option «_source» «_driver/libinput»
[ 1260.014] (II) libinput: XP-PEN STAR G640 Pen Pen (0): is a virtual subdevice
[ 1260.014] () Option «config_info» «udev:/sys/devices/pci0000:00/0000:00:08.1/0000:04:00.3/usb1/1-4/1-4:1.1/0003:28BD:0094.0004/input/input16/event9»
[ 1260.014] (II) XINPUT: Adding extended input device «XP-PEN STAR G640 Pen Pen (0)» (type: STYLUS, id 19)
[ 1260.015] () Option «AccelerationScheme» «none»
[ 1260.016] () XP-PEN STAR G640 Pen Pen (0): (accel) selected scheme none/0
[ 1260.016] () XP-PEN STAR G640 Pen Pen (0): (accel) acceleration factor: 2.000
[ 1260.016] (**) XP-PEN STAR G640 Pen Pen (0): (accel) acceleration threshold: 4

System Information:

Option	Value
Operating System	Pop OS 19.10 (DE: KDE Plasma 5.16.5)
Software Version	0.1.1-rc1
Tablet	XPPEN G640

Driver creates a Configuration folder in the working directory

Description

Driver creates a Configuration folder in the current working directory even if the configuration directory is redirected.

Kaito123 / TabletDriver Goto Github PK

This project forked from hawku/TabletDriver

TabletDriver Download: http://hwk.fi/TabletDriver/TabletDriverV0.2.3.zip

License: GNU General Public License v3.0

C# 49.50% C++ 49.98% C 0.21% Batchfile 0.30%

TabletDriver’s Introduction

This is a low latency graphics tablet driver that is meant to be used with rhythm game osu!

Currently the driver only works when the TabletDriverGUI is running.

The GUI minimizes to system tray / notification area. You can reopen the GUI by double clicking the system tray icon.

If you have problems with the driver, please read the FAQ:

Supported operating systems:

Configured, but not properly tested:

You might need to install these libraries, but usually these are already installed:

Unzip the driver to a folder (Shorter path is recommended, for example C:\Temp\TabletDriver )

Uninstall all other tablet drivers. If you have problems with uninstalling the Wacom drivers, check the GitHub issue #1

Start the TabletDriverGUI.exe

Updating to a new version

VMulti and Huion driver binaries

If you want to compile the code and don’t want to install anything from the TabletDriver binary package, you will need extract the missing drivers from these installation packages:

VMulti driver:

Huion WinUSB driver:

is official osu!tablet supported? #99

Comments

Syetriz commented Apr 4, 2018

is official osu!tablet supported? since it reskin of huion 420?

Hardware/software information

Windows Version: 8.1

Tablet Driver version: v0.1.4

Tablet model: official osu!tablet (huion 420?)

The text was updated successfully, but these errors were encountered:

SuperTilted commented Apr 4, 2018

Supported tablets:
Wacom CTL-470
Wacom CTL-471
Wacom CTL-472
Wacom CTL-480
Wacom CTH-480
Wacom CTL-490
XP Pen G430 (New 2017+ «Model B»)
XP Pen G640
Huion 420
Huion H640P
Gaomon S56K

Syetriz commented Apr 5, 2018

i installed the drivers v0.1.4 and it starts saying «Tablet not found!»
tried uninstalling and reinstalling and nothing seems to work?

hawku commented Apr 5, 2018

@Syetriz This is from your startuplog.txt
HID Device: Vendor: ‘HUION’ Product: »

It seems that the USB product name of the osu!tablet is not «420», so it isn’t detected as Huion 420.

The driver tries to read the string id 6 from the tablet and compare it to «420», but the tablet just replies with an empty string:

You could try different string ids by modifying the tablet.cfg, for example edit this:
Tablet «<62F12D4C-3431-4EFD-8DD7-8E9AAB18D30C>» 6 420
to:
Tablet «<62F12D4C-3431-4EFD-8DD7-8E9AAB18D30C>» 200 420
When you restart the driver, it should show something like this: [USBDevice] [DEBUG] USB String (200): XYZ
Then edit the tablet configuration to:
Tablet «<62F12D4C-3431-4EFD-8DD7-8E9AAB18D30C>» 200 XYZ

The string request id 200 might not return anything or the string might be too generic to be used in tablet detection, for example «HVAN».
You can try string ids between 1 and 255, but I recommend that you try numbers between 190 and 210 first.

If you can’t find a string that identifies the tablet as 420, osu!tablet or for example «HUION_T123», you can just change the tablet configuration to this:
Tablet «<62F12D4C-3431-4EFD-8DD7-8E9AAB18D30C>» 201 HVAN

That wouldn’t be the perfect solution, because it might detect other Huion tablets as Huion 420, but your tablet should be detectable with that configuration.

Failure finding non-existent express keys (Wacom CTL-472) #1170

Comments

Tudi20 commented Jun 11, 2021 •

Description

For Wacom CTL-472, this error is given when the tablet itself has no express keys.

System Information:

Name	Value
Operating System	Windows 10; 20H2; 19042.1052
Software Version	0.5.3.2
Tablet	Wacom CTL-472

The text was updated successfully, but these errors were encountered:

adryzz commented Jun 11, 2021

The warnings are not device-specific. It is expected behaviour to show the warning even on devices without express keys.

Tudi20 commented Jun 11, 2021

Reporting that you have a perfectly working tablet without express keys, or a not-perfectly working tablet with express keys that can’t be used are two different things.
Unless I’m misunderstanding the error message, and you’re saying that due to the software’s capabilities or misconfiguration on my system express keys couldn’t be used, regardless of what tablet I would be using.

Mrcubix commented Jun 11, 2021 •

the message mean what it mean, in your case, your tablet doesn’t have express key, which is why this message show up.

Tudi20 commented Jun 11, 2021 •

In that case the warning should show as info or be silenced. (Especially since osu!lazer likes to show every warning in OTD as an important enough error to notify the user about, when it would be quite obvious to the user that a keyless device will have no keys.)

Mrcubix commented Jun 11, 2021 •

Re-opening for tracking purposes since ghost and void mentioned the possibility of removal of aux device identifier on tablet that doesn’t have aux buttons

gonX / OpenTabletDriver Goto Github PK

Open source, cross-platform, user-mode tablet driver

License: GNU Lesser General Public License v3.0

C# 99.58% Shell 0.20% PowerShell 0.22%

OpenTabletDriver’s Introduction

All statuses of tablets that are supported, untested, and planned to be supported can be found here. Common issue workarounds can be found in the wiki for your platform.

Running OpenTabletDriver binaries

Building OpenTabletDriver from source

The requirements to build OpenTabletDriver are consistent across all platforms. Running OpenTabletDriver on each platform requires different dependencies.

Run build.ps1 to produce binary builds to ‘bin’ folder. These builds will run in portable mode by default.

Required packages (some packages may be pre-installed for your distribution)

To build on ARM linux, run the provided ‘build.sh’ file with the appropriate runtime provided as an argument. For arm64, this is ‘linux-arm64’.

No other dependencies.

Contributing to OpenTabletDriver

If you wish to contribute to OpenTabletDriver, check out the issue tracker. When creating pull requests, follow the guidelines outlined in our contribution guidelines.

For issues and PRs related to OpenTabletDriver’s packaging, please see the repository here.

For issues and PRs related to OpenTabletDriver’s web page, see the repository here.

Supporting a new tablet

You’re also of course welcome to open a PR adding support for it yourself, if you have a good grasp on what’s involved.

Generally this process is relatively easy, especially if it’s for a tablet manufacturer we already have support for on other tablets.

Open tablet driver osu

Frequently Asked Questions

Q: Where is the left handed mode?

Enable the «Left handed (Inverted)» option and set the rotation to 0 degrees.

Q: Why is the cursor shaking?

Small amount of shaking is to be expected with this driver, even when the pen is stationary.

Every graphics tablet does have some amount of noise in the pen position signal. Shaking will get worse when you lift the pen higher. Some tablets might have more noise than others, even if the tablet model is the same.

You can enable the noise filter to reduce the amount of shaking.

Q: What does the smoothing filter do?

Smoothing filter calculates average cursor position.

The filter latency value is an approximation of how much time it will take the cursor to reach the current pen position.

Higher latency will smooth out the cursor movement, but limits how fast the cursor can change the position.

Filter latency value between 15 and 25 milliseconds should be close to some Wacom drivers.

Default rate for the smoothing calculation is 250 Hz, so it should show 250 packets/sec in the osu! raw input settings.

It is possible to set the rate to 1000 Hz, but lower end computers might have problems with the higher update rates.

Q: Driver Stopped, Restarting! Tablet not found! Init failed!

Check the GitHub issues #1 and #35

Q: I’ve installed VMulti driver, but i get an error: «Can’t open VMulti device»

VMulti driver is from the XP-Pen’s installation package so you could try this:

Q: Why my cursor doesn’t reach the edges of the screen?

You might have incorrect screen mapping settings.

If you are sure that settings are correct, you should check this: https://github.com/hawku/TabletDriver/issues/4

If the problem only occurs in osu!, then disable the «Map absolute raw input to osu! window» from the osu’s settings.

Q: I have read this FAQ, but i still have a problem with the driver!

Tablet not found (Huion 420 Bought from the osu store) #112

Comments

LukeBrandenburg commented Apr 10, 2018

Hardware/software information

Windows Version: 10 64bit

Tablet Driver version: 0.1.4

Tablet model: H420

Keep getting the error that the tablet isnt found.

2018-04-10 18:44:50 [INFO] Driver version: 0.1.4
2018-04-10 18:44:50 [INFO] Windows version: Microsoft Windows NT 6.2.9200.0
2018-04-10 18:44:50 [INFO] Windows product: Windows 10 Education
2018-04-10 18:44:50 [INFO] Windows release: 1709
2018-04-10 18:44:50 [INFO]
2018-04-10 18:44:50 [INFO] >> CheckTablet
2018-04-10 18:44:50 [ERROR] Tablet not found!
2018-04-10 18:44:50 [ERROR] Check the list of supported tablets from the GitHub page.
2018-04-10 18:44:50 [ERROR] http://github.com/hawku/TabletDriver

I have included the startup log under here.
startuplog.txt

The text was updated successfully, but these errors were encountered:

OpenTabletDriver

Repositories

OpenTabletDriver Public

Open source, cross-platform, user-mode tablet driver

50 Updated Aug 28, 2022

OpenTabletDriver.Packaging Public

OpenTabletDriver packaging scripts

3 Updated Jul 9, 2022

OpenTabletDriver.Web Public

ASP.NET Core site for OpenTabletDriver

6 Updated Jun 22, 2022

Plugin-Repository Public

Plugin repository source for OpenTabletDriver plugins

1 Updated May 26, 2022

TabletDriverFilters Public

TabletDriver Filters ported to OpenTabletDriver

0 Updated May 21, 2022

Eto Public

1 Updated Mar 4, 2022

OpenTabletDriver-udev Public archive

Tool to create udev rules used in OpenTabletDriver

1 Updated May 4, 2021

OpenTabletDriver.Installer Public archive

Installer for OpenTabletDriver

1 Updated Mar 30, 2021

Footer

You can’t perform that action at this time.

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.

Osu tablet locking on to only half the screen #1123

Comments

QuazzyG commented Jun 14, 2021

I recently just did a update on windows and reinstalled the tablet driver and my tablet is stuck on like half of the screen while I am on osu i think this is an issue with my two monitors is there any way to fix this

Hardware/software information

Windows Version:
10

Tablet Driver version:
TabletDriverV0.2.3
Tablet model: Wacom ctl 472

The text was updated successfully, but these errors were encountered:

MysticalWizard commented Jun 15, 2021

I have the same issue as well. The only fix I could find for this issue was to change display settings to single screen (windows + P and select PC screen only) then relaunch the TabletDriver, make sure only one screen is shown on the driver, press save settings, and restart driver. After that change display settings to multiscreen (windows + P and select extend). Once you’ve changed your display settings back to multiscreen, don’t touch anything and just minimize TabletDriver to tray.
The only downside of this is that you have to repeat this every time you restart your PC which is annoying but it seems to be the only working solution for now.

OpenTabletDriver/OpenTabletDriver.Installer

Use Git or checkout with SVN using the web URL.

Work fast with our official CLI. Learn more.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching Xcode

If nothing happens, download Xcode and try again.

Launching Visual Studio Code

Your codespace will open once ready.

There was a problem preparing your codespace, please try again.

Latest commit

Git stats

Files

Failed to load latest commit information.

README.md

Installer for OpenTabletDriver

About

Installer for OpenTabletDriver

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Contributors 6

Languages

Footer

You can’t perform that action at this time.

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.

Tablet doesn’t work in osu #1541

Comments

SiriusBirius commented Oct 22, 2021

I had set up the driver and everything worked fine but once I launched osu i couldnt move the cursor with the pentablet but it would when I used my mouse. Also, the tablet would work on every app outside of osu, i just couldn’t move the cursor in osu. Please help. Thanks!

The text was updated successfully, but these errors were encountered:

jamesbt365 commented Oct 22, 2021

Don’t run osu as admin and turn off raw input

SiriusBirius commented Oct 22, 2021

Don’t run osu as admin and turn off raw input

It worked! Thank you very much for the help!

Footer

You can’t perform that action at this time.

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.

OpenTabletDriver/OpenTabletDriver.Web

Use Git or checkout with SVN using the web URL.

Work fast with our official CLI. Learn more.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching Xcode

If nothing happens, download Xcode and try again.

Launching Visual Studio Code

Your codespace will open once ready.

There was a problem preparing your codespace, please try again.

Latest commit

Git stats

Files

Failed to load latest commit information.

About

ASP.NET Core site for OpenTabletDriver

Topics

License

Stars

Watchers

Forks

Releases

Contributors 13

Languages

Footer

You can’t perform that action at this time.

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.

How to easily setup a Gaomon, Wacom or other tablet on Linux. (Driver + Tablet Area + More!)

Нет аккаунта?

How to easily setup a Gaomon, Wacom or other tablet on Linux. (Driver + Tablet Area + More!)

. THIS GUIDE IS DEPRECIATED. SEE https://opentabletdriver.net/Wiki INSTEAD OF THIS GUIDE.

Before following this guide, check if your tablet is not compatable or has issues by clicking here. If your tablet is not supported, you can follow my more complex, older tutorial that may work for you here.

Hello again! I have started posting these tutorials since there was no solid guide on how to make my Gaomon S620 to work on Linux, so I made an older guide on how to install some drivers to make practically any tablet workable and customizable. Looking back, that guide isn’t written well and is very complicated. This guide is re-made to be as simple as possible and will use easier methods for installing drivers and customizing your tablet. Here are some opening notes that I would like to state:

Step 0: If Trouble Arises

If you have found a solution to a problem while following this guide, please put it in the comments!

If you are having trouble installing and/or stuck on trying to get OpenTabletDriver to work, try looking at this useful page on solving any common problem with the driver suite. If that still does not solve your issue, try joining their development Discord and ask around; invite is also in their GitHub. If all else fails, open an issue ticket.

If these instructions are flawed, outdated, or do not work, please let me know in the comments! Even small suggestions help out, such as things with formatting, grammar, spelling, wording, command parameters, etc.

Arch Linux
If you are an Arch user all you need to do is run:
After that just skip to step 2.

Ubuntu/Debian
Lets start off by finding the the latest Microsoft repository package. Open https://packages.microsoft.com/config/ in your browser and a small list of Linux distributions should appear. Then click on your distro version and then click on packages-microsoft-prod.deb. The file should start downloading after you click it. If your operating system is not showing in the Microsoft directory, click on «Finding your Distribution» under the «Other Distro/Distro not Listed» section.

If for some reason it isn’t adding the repo, try running «sudo apt purge packages-microsoft-prod» and then re-install it. If you ever need to remove packages-microsoft-prod, make sure you use apt purge, otherwise, when you uninstall and reinstall it, it wont install correctly and the repo wont be added.

After that run:
And

Once that is done installing, go on to step 2.

Other Distro/Distro not Listed
If you cannot find your distribution in https://packages.microsoft.com/config/, check «Finding your Distribution» below. If it is there, download the packages-microsoft-prod package and install it with your favorite package manager/installer.

Some operating systems, like Linux Mint, are actually based off of a bigger Linux distribution. All that is different with operating systems like Linux Mint is how you interact with it, how its configured, what is changed about it, and what it comes with.

That said, run the following command:
And something like this should appear:
Next to «ID_LIKE» we can see our distribution is based off of Ubuntu, so we select Ubuntu in the Microsoft directory. In most cases, the version of our OS does not correlate at all to the base distro, so search on the internet what version your base distribution version is, including the code-name of it. You can find the code-name by looking at the output of the command and finding «UBUNTU_CODENAME,» replacing «UBUNTU» with the name of your base distro.

So in my case, I would search «Ubuntu bionic release version» since my base distro is «ubuntu» and the code-name of my base distro is «bionic.» The result I get from the internet is 18.04.5 LTS, so I would select 18.04 in the Microsoft directory.

Once you have done that, install the dotnet-sdk-5.0 and dotnet-runtime-5.0 packages.

Step 2: Installing OpenTabletDriver

Once downloading the package, open it with your favorite package installer or just run
And then
If you have moved the file to a different location, cd to the directory in which its located and then run the «sudo apt install» command.

Other Distro
If you would like to provide instructions on how to install OpenTabletDriver, please put them in the comments! I don’t have the time currently to make instructions for other distros.

Step 3: Making OpenTabletDriver work

Once you have installed it, open it and follow the guide that shows you how to use the application. You can also open the GUI by running «opentabletdriver» inside your terminal.
Once you are done with following the introduction tutorial, it is highly likely your tablet wont be detected. Lets make it so it can.

First install Git by running:
And then run each of these commands individually, from top to bottom:
After that restart your computer to put the changes into effect.
The above commands basically enables any application to interact with any tablet that OpenTabletDriver supports. You may want to do these commands again when you reinstall a newer version of OpenTabletDriver. You should especially want do these commands again if you are installing a newer version of the drivers and if you are trying to use a tablet that OpenTabletDriver previously did not support.

After this, you are finished! If you are still having issues, look at the Linux FAQ for solutions to common problems. If you are still having issues, join the OpenTabletDriver Discord server for support. If all else fails, open a issue ticket.

Discussions: OpenTabletDriver/OpenTabletDriver

Use alt + click/return to exclude labels.

Discussions

1 You must be logged in to vote

Can applications get pen data from this driver?

1 You must be logged in to vote

Make It Easier to Toggle Between Windows Ink and Aboslute Mode

1 You must be logged in to vote

Xp-Pen Starg640 not detected

1 You must be logged in to vote

Mouse mode? Open Tablet Driver

1 You must be logged in to vote

Pen pressure and tablet buttons in MacOS

1 You must be logged in to vote

32 bit PC’s

1 You must be logged in to vote

Is there an option to reverse the tilt direction?

2 You must be logged in to vote

will you add support for Parblo Ninos N7B?

1 You must be logged in to vote

Custom pen buttons in windows ink mode

1 You must be logged in to vote

Huion H640P not detected on OpenTabletDriver

2 You must be logged in to vote

Option to register daemon as a service

1 You must be logged in to vote

Can add Dark theme?

1 You must be logged in to vote

How to Install on Garuda Linux

1 You must be logged in to vote

How to get the tablet name using otd?

1 You must be logged in to vote

Gaomon S620 Not Detected, Taking Forever to Find/Connect

1 You must be logged in to vote

Huion 1060P Not detected in OTD

1 You must be logged in to vote

Hover off plugin

1 You must be logged in to vote

why shouldnt OTD run as admin?

1 You must be logged in to vote

Tablet registers every click has two clicks [XP pen Star G640s]

7 You must be logged in to vote

Windows start daemon only (no GUI) at startup

1 You must be logged in to vote

program does not open

1 You must be logged in to vote

Support for Veikk VK1060PRO?

1 You must be logged in to vote

Huion H430P not detected

Footer

You can’t perform that action at this time.

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.

Pen pressure and documentation #1266

After perusing the bug reports as well as discussion here and additional web searches, it appears that OTD is set up without pen-pressure by default, requiring a plugin (Winink?) to supply it.

I scuffed through the documentation, but there is very little info about it overall, and I assumed that the ‘supported’ tablets would have pen pressure as the other drivers do.
I also see links to «OSU», which I’m assuming is an application that uses tablets, but I’m not familiar with that.

I use the tablet for sketching and painting (Krita), teaching myself Blender as well as some Gimp stuff, and having pen pressure is mandatory for what I’m doing.

Before I file a bug report for the lack of pen pressure (out of box, as it were), is this how it is supposed to work? If that is the case, there really needs to be clear documentation if this driver is to get a wider audience.

I have tried the release version (5.3.3-1) as well as the git release as of yesterday with my Huion HS610.
I require all the buttons to be programmable, and in the release version, my tablet is only partially supported with 8 buttons listed.
The GIT version seems to have fixed all of that (thank you for your fast response to my bug report on that), but OTD defaults to making the pen tip «mouse button 1», and when I try other selections the pen movement stops.

I did a little more research and discovered the ‘winInk’ plugin, but the console reports that it and its parent app are ‘out of date’ and not loaded for the git master version, and while the plugin loads with 5.3.3-1, the point motion fails as soon as it is loaded.

Anyway, I love the work and effort being put in here, and with a GUI that can actually save settings, it is pretty much what I’m after in a driver set.

I would appreciate a bit more documentation than what is currently available, as this seems to be an outstanding replacement for the hassle of bash scripts with the current non OTD implementation.

addendum:
————hid_uclogic is unloaded before starting OTD. I’m concerned that the internal kernel version of digimend might be causing issues, but I’m not a programmer, so I’m not sure where to even begin looking to see if this might be an issue.

Again, thank you for the work on this.

Beta Was this translation helpful? Give feedback.

Discussions: OpenTabletDriver/OpenTabletDriver

Use alt + click/return to exclude labels.

Discussions

1 You must be logged in to vote

Can applications get pen data from this driver?

1 You must be logged in to vote

Xp-Pen Starg640 not detected

1 You must be logged in to vote

Mouse mode? Open Tablet Driver

1 You must be logged in to vote

Pen pressure and tablet buttons in MacOS

1 You must be logged in to vote

Is there an option to reverse the tilt direction?

2 You must be logged in to vote

will you add support for Parblo Ninos N7B?

1 You must be logged in to vote

Huion H640P not detected on OpenTabletDriver

1 You must be logged in to vote

How to get the tablet name using otd?

1 You must be logged in to vote

Gaomon S620 Not Detected, Taking Forever to Find/Connect

1 You must be logged in to vote

Huion 1060P Not detected in OTD

1 You must be logged in to vote

why shouldnt OTD run as admin?

1 You must be logged in to vote

Tablet registers every click has two clicks [XP pen Star G640s]

1 You must be logged in to vote

program does not open

1 You must be logged in to vote

Huion H430P not detected

1 You must be logged in to vote

Can’t seem to install WindowsInk

1 You must be logged in to vote

[Huion H430p] The driver suddenly doesn’t work properly today

1 You must be logged in to vote

driver not working

1 You must be logged in to vote

Huion GT 221 Pro support?

1 You must be logged in to vote

Gaomon S620 not detected

1 You must be logged in to vote

Hover/Lift off distance

0 You must be logged in to vote

1 You must be logged in to vote

A15 VEIKK unable to detect tablet

1 You must be logged in to vote

XP Pen Deco 01 V2 Incorrect Tablet Area

Footer

You can’t perform that action at this time.

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.

Works fine with every other apps except fps games #1002

Hey i have a Huion WH1409 V2 tablet which is supported by OpenTabletDriver. I can use the driver with no problem in Relative Mode. But whenever i open a fps game such as Valorant i can not move my camera in game. It still registers the click function, also its works in game settings and lobby. I tried changing the windowed resolution from fullscreen also tried to change the Relative Mode to Absolute Mode. Anyone know what is the problem?

Beta Was this translation helpful? Give feedback.

1 You must be logged in to vote

Replies

Valorant’s anticheat blocks the SendInput API we use for cursor positioning. A workaround for this is to use the VMultiMode plugin which is installable from the plugin manager. As it requires installing a kernel mode dummy driver, it bypasses using the SendInput API and the anticheat can’t differ it from a real input source.

Beta Was this translation helpful? Give feedback.

2 You must be logged in to vote

Sorry for the late reply, yes looks like i missed some parts now the buttons works. But this time my keyboard and click function not working together. I mean i cannot click whenever i press any buttons on my keyboard, only happening in vmulti mode. Is it normal?

Beta Was this translation helpful? Give feedback.

Apparently its only happening when im using left function, its not happening when i switch to middle or right options.

Beta Was this translation helpful? Give feedback.

have you solve these problems. I’m having the same problems here with my huion tablet

Beta Was this translation helpful? Give feedback.

Not the last one, but you can workaround the problem like this;
Go to your mouse settings on windows, change primary button left to right.
Then go to in game settings and change shoot button to right click.

Also if you want to use scope or nearsight;
Change your pen button in opentabletdriver to middle mouse button or any other button that you aren’t using expect left click.
And of course make it same in game settings too.

Beta Was this translation helpful? Give feedback.

Yes i did. In normal relative mode all buttons and click function works but i cannot move my camera in game, with vmulti relative mode option my pen just works for looking around, even in desktop i cannot click anything. I tried connecting my tablet with cable and with usb bluetooth.

How did you get your camera to work? I can only get my cursor moving with Valorant open using Windows Ink but the camera doesn’t work at all nor can I shoot. I have VMulti installed but it doesn’t work for me.

Beta Was this translation helpful? Give feedback.

Arch Linux User Repository

Search Criteria

Package Details: opentabletdriver-git v0.6.0.4.r20.g325c28ca-2

Package Actions

Git Clone URL:	https://aur.archlinux.org/opentabletdriver-git.git (read-only, click to copy)
Package Base:	opentabletdriver-git
Description:	A cross-platform open source tablet driver
Upstream URL:	https://github.com/OpenTabletDriver/OpenTabletDriver
Keywords:	artisul digimend gaomon huion otd parblo uc-logic uclogic ugtablet veikk wacom xencelabs xp-pen xppen
Licenses:	LGPL3
Conflicts:	opentabletdriver
Provides:	opentabletdriver
Submitter:	LavaDesu
Maintainer:	gonX
Last Packager:	gonX
Votes:	14
Popularity:	1.42
First Submitted:	2020-01-02 07:53 (UTC)
Last Updated:	2022-07-18 23:49 (UTC)

Dependencies (8)

Required by (0)

Sources (6)

Pinned Comments

Latest Comments

gonX commented on 2022-05-16 14:27 (UTC)

xiretza commented on 2022-05-12 09:16 (UTC)

Why does this package explicitly depend on dotnet-runtime-bin now? Shouldn’t dotnet-runtime>=6.0.4 be enough ( dotnet-runtime-bin provides dotnet-runtime=$pkgver )?

gonX commented on 2021-11-13 16:57 (UTC) (edited on 2021-11-13 17:05 (UTC) by gonX)

Until FS#72738 is fixed people will likely have to use dotnet-sdk-bin from AUR.

the dotnet-sdk has been updated to 6.0 I believe. Therefore I can’t update my system without removing opentabletdriver-git before.

Thanks for the report.

I’ve pushed a fix that prevents the dependency conflict at least.

Having to rebuild repo packages because they don’t provide debug symbols is already annoying enough, I don’t want to also have to dig through PKGBUILDs to find out that they strip debug symbols.

pkr commented on 2021-11-13 11:37 (UTC)

the dotnet-sdk has been updated to 6.0 I believe. Therefore I can’t update my system without removing opentabletdriver-git before. Is it possible to update the dependencies to their latest counterparts?

Thanks in advance!

xiretza commented on 2021-10-15 11:25 (UTC)

Regarding the latest commit («Don’t build or package debug symbols»): please don’t do that. Having to rebuild repo packages because they don’t provide debug symbols is already annoying enough, I don’t want to also have to dig through PKGBUILDs to find out that they strip debug symbols.

pkr commented on 2021-10-09 16:25 (UTC)

Currently doesn’t build anymore.

Error is: cp: cannot stat ‘/home/paul/.cache/yay/opentabletdriver-git/src/OpenTabletDriver/OpenTabletDriver/Configurations’: No such file or directory

K4LCIFER commented on 2021-07-11 01:23 (UTC)

I accidentally flagged this package out of date. Please disregard. I meant to flag the non git version.

D3SOX commented on 2021-06-10 15:22 (UTC)

Thanks, works fine now!

LavaDesu commented on 2021-06-10 15:00 (UTC)

@D3SOX Whoops. I have pushed a fix now, thanks for reporting!

D3SOX commented on 2021-06-10 14:41 (UTC)

new pkgbuild doesn’t work for me

inphy commented on 2021-04-28 19:24 (UTC)

I had to blacklisted inputwacom kernel module(wacom) to make it work properly. Is there any other way?

LavaDesu commented on 2021-04-16 06:00 (UTC)

The community dotnet-sdk package is updated to 5.0.5 now, so everything should just work.

solonovamax commented on 2021-04-11 18:38 (UTC) (edited on 2021-04-11 18:39 (UTC) by solonovamax)

solonovamax commented on 2021-04-11 18:31 (UTC)

LavaDesu commented on 2021-04-09 16:49 (UTC) (edited on 2021-04-09 16:50 (UTC) by LavaDesu)

Builds are currently failing due to Symantec’s root certificate being removed from ca-certificates-mozilla on 3.63-1, breaking nuget restore.

For more information, see the bug report

Current workarounds are:
— Downgrade ca-certificates-mozilla to 3.62-1
— Install dotnet-sdk-bin from the AUR as sdk5.0.5 disables nuget signing. At the time of writing, dotnet-sdk from the official repos is outdated on sdk5.0.4.
— Manually copy and install the missing certificate

AUR packages are user produced content. Any use of the provided files is at your own risk.

Driver recognizes Huion h610 as Huion osu! tablet. #443

Comments

HeyItsKairu commented Jul 9, 2019

Hardware/software information

Windows Version: Windows 10

Tablet Driver version: 0.2.3

Tablet model: Huion H610

#255
Same scenario as this, but I am using a Huion H610 rather than a Huion K58.
I know my tablet is not supported, and if adding support is not something you are interested in I understand.

The text was updated successfully, but these errors were encountered:

InfinityGhost commented Jul 9, 2019

Add getstrings 1 255 to the custom commands so we can find some descripting information about the tablet.

HeyItsKairu commented Jul 9, 2019

I managed to fix my problem by manually changing the Huion osu! tablet in tablet.cfg to fit correctly with the H610. If you would still like me to troubleshoot let me know, otherwise I can close the issue here. If you would like me to troubleshoot I added the command, but I don’t know what to do with it.

InfinityGhost commented Jul 9, 2019

Which settings did you use for the H610? This will help add this tablet to this repo (eventually) and my fork

HeyItsKairu commented Jul 9, 2019

Huion osu!tablet

USBTablet «<62F12D4C-3431-4EFD-8DD7-8E9AAB18D30C>»
CheckString 200 «HVAN»
Name «Huion osu!tablet (check the GitHub issue #99)»
ReportId 0x07
ReportLength 8
DetectMask 0x80
MaxX 20850
MaxY 12510
MaxPressure 2047
Width 254
Height 152.4
InitStrings 100 200

I won’t claim to have done it perfectly but it appears to be working flawlessly for me.
(I’m guessing this is what you were asking for)

[Linux] Cursor not moving in osu #707

Comments

Fxsch commented Jan 22, 2021

Description

The cursor is moving perfectly fine on my desktop and in every other application except for osu! and osu! lazer. When I set the game to windowed, move my cursor outside the window and then move it back inside osu! with my tablet, it works aswell but it won’t work in fullscreen or in borderless mode. It also works in other programs when they’re in fullscreen, just not any of the two osu! versions.

System Information:

Name	Value
Operating System	Manjaro Gnome, Gnome version 3.38.3, newest Manjaro version
Software Version	0.5.0.r40.ge7bd0e5-1
Tablet	Veikk S640

The text was updated successfully, but these errors were encountered:

X9VoiD commented Jan 22, 2021

Fxsch commented Jan 22, 2021

After switching between fullscreen, borderless and windowed a few times it suddenly works as long as I don’t go out of the window but as soon as I go out of osu and into osu again it stops working

ghost commented Jan 31, 2021

System Information:

Name	Value
Operating System	Arch Gnome 3.38.3
Software Version	v0.5.1-r0.gbccf6af
Tablet	CTH-480

ghost commented Feb 2, 2021

Only happens on wayland for me

InfinityGhost commented Feb 3, 2021 •

Odd that it only happens on wayland, since we’re using libevdev. Maybe actually a lazer and wine issue? Odds are not though

Fxsch commented Feb 8, 2021

In osu! lazer it is possible to move the cursor on the second screen and then back onto the main screen with the tablet to make it work but osu! stable can’t be the «selected» application to make it work. If I switch the window to something else and still have osu! opened, I can also move the cursor in osu! with my tablet but as soon as I click on it and osu! becomes the selected window again, I can only move it with my mouse

X9VoiD commented Feb 8, 2021

Fxsch commented Feb 18, 2021

I found a workaround: If osu! and OpenTabletDriver are both opened, press the Windows key and select OpenTabletDriver, osu! will then put itself in the foreground anyways and the cursor can be moved with the tablet

Fxsch commented Feb 23, 2021

After switching to Manjaro with KDE, which doesn’t use Wayland, it works perfectly fine

InfinityGhost commented Feb 23, 2021 •

Really doesn’t make sense why this only happens on Wayland, unless SDL2 is at fault here, or the Wayland implementation

VeryLongNicknameSuchWow commented Mar 7, 2021

Having the same issue on Gnome 3.38.3 with Wayland. Under X11 everything works fine.
Only lazer is affected, standard is fine on both.

VeryLongNicknameSuchWow commented Mar 24, 2021

This is now fixed with the OTD integrated into osu! Works fine on wayland.

osufan11 commented Apr 8, 2021

Description

System Information:

Name Value
Operating System Manjaro Gnome, Gnome version 3.38.3, newest Manjaro version
Software Version 0.5.0.r40.ge7bd0e5-1
Tablet Veikk S640

Try turning off High Precision Mouse in osu settings.

OpenTabletDriver/OpenTabletDriver

Use Git or checkout with SVN using the web URL.

Work fast with our official CLI. Learn more.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching Xcode

If nothing happens, download Xcode and try again.

Launching Visual Studio Code

Your codespace will open once ready.

There was a problem preparing your codespace, please try again.

Latest commit

Git stats

Files

Failed to load latest commit information.

README.md

All statuses of tablets that are supported, untested, and planned to be supported can be found here. Common issue workarounds can be found in the wiki for your platform.

Running OpenTabletDriver binaries

Building OpenTabletDriver from source

The requirements to build OpenTabletDriver are consistent across all platforms. Running OpenTabletDriver on each platform requires different dependencies.

Run build.ps1 to produce binary builds to ‘bin’ folder. These builds will run in portable mode by default.

Required packages (some packages may be pre-installed for your distribution)

To build on ARM linux, run the provided ‘build.sh’ file with the appropriate runtime provided as an argument. For arm64, this is ‘linux-arm64’.

No other dependencies.

Contributing to OpenTabletDriver

If you wish to contribute to OpenTabletDriver, check out the issue tracker. When creating pull requests, follow the guidelines outlined in our contribution guidelines.

For issues and PRs related to OpenTabletDriver’s packaging, please see the repository here.

For issues and PRs related to OpenTabletDriver’s web page, see the repository here.

Supporting a new tablet

You’re also of course welcome to open a PR adding support for it yourself, if you have a good grasp on what’s involved.

Generally this process is relatively easy, especially if it’s for a tablet manufacturer we already have support for on other tablets.

Support Request: Wacom Intuos CTL4100 no desktop input #1294

Comments

Lorphex commented Jul 29, 2021 •

Support Request

What I’ve already tried

Diagnostic Information

The text was updated successfully, but these errors were encountered:

Mrcubix commented Jul 29, 2021 •

Plug your tablet in and try again (export diag once plugged in, cause it wasn’t plugged when the diagnostic was exported)

Lorphex commented Jul 29, 2021

Plug your tablet in and try again (export diag once plugged in, cause it wasn’t plugged when the diagnostic was exported)

Updated. Sorry been having this issue for a bit and just re-made the diag a few times.

Mrcubix commented Jul 29, 2021 •

Lorphex commented Jul 29, 2021 •

Closing out of Riot Vanguard fixed it. I really don’t want that to be the solution since I like to play Osu! in queues and such. Is there any way we could get around that?
No warnings about admin privileges when starting OTD
Wacom drivers are not installed

Mrcubix commented Jul 29, 2021 •

These are the 3 things i can provide:

Lorphex commented Jul 29, 2021

So I’ll just take the fat L for this one I guess
I did submit a ticket about OTD being blocked by Vanguard, since controller players are in the highest ranks anyway so clearly it’s not working to block alternative input devices.
I’ll try the Windows Ink settings.

Mrcubix commented Jul 29, 2021

if you have a mouse plugged in, then other devices won’t work / properly, it doesn’t prevent people from using controllers or hardware cheats, and doesn’t even block some software cheats, in short, it’s bad

Lorphex commented Jul 29, 2021

That’s good to know actually. I might be able to get away with just turning off my mouse while I play Osu!
Thanks for the help / info.

Mrcubix commented Jul 29, 2021 •

But like you saw earlier, vanguard block input from OTD anywhere else until you install the and setup the windows ink plugin
(it’s requirement is a kernel level driver).
what i was referring to is the fact you can’t have multiple pointers devices connected at the same time without encountering issues

Mrcubix commented Aug 15, 2021

i’ll close this as it has basically been solved

Footer

You can’t perform that action at this time.

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.

InfinityGhost/OpenTabletDriverPlugins

Use Git or checkout with SVN using the web URL.

Work fast with our official CLI. Learn more.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching Xcode

If nothing happens, download Xcode and try again.

Launching Visual Studio Code

Your codespace will open once ready.

There was a problem preparing your codespace, please try again.

Latest commit

Git stats

Files

Failed to load latest commit information.

README.md

About

Generic plugins for OpenTabletDriver

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Contributors 2

Languages

Footer

You can’t perform that action at this time.

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.

XP-Pen Star G640 not being recognized #602

Comments

laurorual commented Mar 14, 2020 •

I’m trying to install this driver since reddit told me it has less input lag but i cant make the TabletDriverGUI recognize my tablet, it always says in the console «tablet not found!».

First i tried uninstalling all XP-Pen drivers, rebooting PC, installing hawku drivers through «install_vmulti_driver.bat» and open TabletDriverGUI. Not working.
Then, after running «remove_vmulti_driver.bat», i tried the «install_vmulti_64.bat» inside the «driver_vmulti» folder, still not working.

Then i tried with XP-Pen drivers, both «normal» and «osu» drivers, still not working, even if i end «Pentable Service» process in the Task Manager. Everything i tried i get «tablet not found!»

It is not a issue with my tablet since it works fine with official XP-Pen drivers and the official app «PenTablet» from them, so i don’t know what it could be.
Maybe i have a new revision of the G640?

Hardware/software information

Windows Version: 1909

Tablet Driver version: 0.2.3

Tablet model: XP-Pen Star G640

The text was updated successfully, but these errors were encountered:

Freemmm commented Mar 19, 2020

I have the same problem.

NotOnAClient commented Apr 1, 2020

Same problem here, might be similar to the g430s_B where the new versions wouldn’t work.

HongClarence commented Apr 1, 2020 •

Hi, after poking around for 3 hours I finally got it to work. Head to the config folder, edit the tablet.cfg with notepad or anything similar and paste this

XP-Pen G640

HIDTablet 0x28BD 0x0914 0xFF0A 0x0001
#CheckString Manufacturer «XP-PEN»
CheckString Product «6 inch PenTablet»
Name «XP-Pen G640»
ReportId 0x02
ReportLength 12
DetectMask 0x80
MaxX 16000
MaxY 10000
MaxPressure 8191
Width 160.0
Height 100.0
InitReport 0x02 0xB0 0x04 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

or just replace the tablet.cfg file with this, remember to change the txt file into cfg.
tablet.txt

NotOnAClient commented Apr 1, 2020

Hi, after poking around for 3 hours I finally got it to work. Head to the config folder, edit the tablet.cfg with notepad or anything similar and paste this

XP-Pen G640

or just replace the tablet.cfg file with this, remember to change the txt file into cfg.
tablet.txt

Thanks! It works now

NotOnAClient commented Apr 1, 2020

Hi, after poking around for 3 hours I finally got it to work. Head to the config folder, edit the tablet.cfg with notepad or anything similar and paste this

XP-Pen G640

Thanks! It works now

I take that back, it detects the tablet but the cursor does not move.

HongClarence commented Apr 1, 2020

Try reinstalling the vmulti drivers, it should work, make sure you uninstall xp-pen’s drivers as well

NotOnAClient commented Apr 1, 2020

Thanks it works now

thunderboltcg commented Apr 11, 2020

omggggggggggggggg thanks soooooooooooooo much

HongClarence commented Apr 11, 2020

No problem, do let me know if there is any latency though, not sure if its my tablet or just me

Hexishu commented Apr 20, 2020

@HongClarence It doesn’t work for me (or my friend) though, I tried to apply your fix but it still says «Driver stopped. Restarting! Check console.

2020-04-21 00:57:42 [INFO] >> Name «Wacom CTH-461»
2020-04-21 00:57:42 [INFO] >> ReportLength 9
2020-04-21 00:57:42 [INFO] >> DetectMask 0x40
2020-04-21 00:57:42 [INFO] >> MaxX 14720
2020-04-21 00:57:42 [INFO] >> MaxY 9200
2020-04-21 00:57:42 [INFO] >> MaxPressure 1023
2020-04-21 00:57:42 [INFO] >> Width 147.200
2020-04-21 00:57:42 [INFO] >> Height 92.000
2020-04-21 00:57:42 [INFO] >> InitFeature 0x02 0x02
2020-04-21 00:57:42 [INFO] >> # Wacom CTH-470
2020-04-21 00:57:42 [INFO] >> Tablet 0x056A 0x00DE 0xFF0D 0x0001
2020-04-21 00:57:42 [WARNING] Can’t open HID tablet 0x056A 0x00DE 0xFF0D 0x0001
2020-04-21 00:57:42 [INFO] >> Tablet 0x056A 0x00DE 0x000D 0x0001
2020-04-21 00:57:42 [WARNING] Can’t open HID tablet 0x056A 0x00DE 0x000D 0x0001
2020-04-21 00:57:42 [INFO] >> Name «Wacom CTH-470»
2020-04-21 00:57:42 [INFO] >> ReportLength 10
2020-04-21 00:57:42 [INFO] >> DetectMask 0x40
2020-04-21 00:57:42 [INFO] >> MaxX 14720
2020-04-21 00:57:42 [INFO] >> MaxY 9200
2020-04-21 00:57:42 [INFO] >> MaxPressure 1023
2020-04-21 00:57:42 [INFO] >> Width 147.200
2020-04-21 00:57:42 [INFO] >> Height 92.000
2020-04-21 00:57:42 [INFO] >> InitFeature 0x02 0x02
2020-04-21 00:57:42 [INFO] >> # Wacom CTH-480
2020-04-21 00:57:42 [INFO] >> Tablet 0x056A 0x0302 0xFF0D 0x0001
2020-04-21 00:57:42 [WARNING] Can’t open HID tablet 0x056A 0x0302 0xFF0D 0x0001
2020-04-21 00:57:42 [INFO] >> Tablet 0x056A 0x0302 0x000D 0x0001
2020-04-21 00:57:42 [WARNING] Can’t open HID tablet 0x056A 0x0302 0x000D 0x0001
2020-04-21 00:57:42 [INFO] >> Name «Wacom CTH-480»
2020-04-21 00:57:42 [INFO] >> ReportLength 10
2020-04-21 00:57:42 [INFO] >> DetectMask 0x40
2020-04-21 00:57:42 [INFO] >> MaxX 15200
2020-04-21 00:57:42 [INFO] >> MaxY 9500
2020-04-21 00:57:42 [INFO] >> MaxPressure 1023
2020-04-21 00:57:42 [INFO] >> Width 152.000
2020-04-21 00:57:42 [INFO] >> Height 95.000
2020-04-21 00:57:42 [INFO] >> InitFeature 0x02 0x02
2020-04-21 00:57:42 [INFO] >> # Wacom CTH-490
2020-04-21 00:57:42 [INFO] >> Tablet 0x056A 0x033C 0xFF0D 0x0001
2020-04-21 00:57:42 [WARNING] Can’t open HID tablet 0x056A 0x033C 0xFF0D 0x0001
2020-04-21 00:57:42 [INFO] >> Tablet 0x056A 0x033C 0x000D 0x0001
2020-04-21 00:57:42 [WARNING] Can’t open HID tablet 0x056A 0x033C 0x000D 0x0001
2020-04-21 00:57:42 [INFO] >> Name «Wacom CTH-490»
2020-04-21 00:57:42 [INFO] >> ReportLength 10
2020-04-21 00:57:42 [INFO] >> DetectMask 0x40
2020-04-21 00:57:42 [INFO] >> MaxX 15200
2020-04-21 00:57:42 [INFO] >> MaxY 9500
2020-04-21 00:57:42 [INFO] >> MaxPressure 2047
2020-04-21 00:57:42 [INFO] >> Width 152.000
2020-04-21 00:57:42 [INFO] >> Height 95.000
2020-04-21 00:57:42 [INFO] >> InitFeature 0x02 0x02
2020-04-21 00:57:42 [INFO] >> Type WacomIntuos
2020-04-21 00:57:42 [INFO] >> # Wacom CTH-661
2020-04-21 00:57:42 [INFO] >> Tablet 0x056A 0x00D3 0xFF0D 0x0001
2020-04-21 00:57:42 [WARNING] Can’t open HID tablet 0x056A 0x00D3 0xFF0D 0x0001
2020-04-21 00:57:42 [INFO] >> Tablet 0x056A 0x00D3 0x000D 0x0001
2020-04-21 00:57:42 [WARNING] Can’t open HID tablet 0x056A 0x00D3 0x000D 0x0001
2020-04-21 00:57:42 [INFO] >> Name «Wacom CTH-661»
2020-04-21 00:57:42 [INFO] >> ReportLength 9
2020-04-21 00:57:42 [INFO] >> DetectMask 0x40
2020-04-21 00:57:42 [INFO] >> MaxX 21648
2020-04-21 00:57:42 [INFO] >> MaxY 13700
2020-04-21 00:57:42 [INFO] >> MaxPressure 1023
2020-04-21 00:57:42 [INFO] >> Width 216.480
2020-04-21 00:57:42 [INFO] >> Height 137.000
2020-04-21 00:57:42 [INFO] >> InitFeature 0x02 0x02
2020-04-21 00:57:42 [INFO] >> # Wacom CTH-661(A)
2020-04-21 00:57:42 [INFO] >> Tablet 0x056A 0x00D8 0xFF0D 0x0001
2020-04-21 00:57:42 [WARNING] Can’t open HID tablet 0x056A 0x00D8 0xFF0D 0x0001
2020-04-21 00:57:42 [INFO] >> Tablet 0x056A 0x00D8 0x000D 0x0001
2020-04-21 00:57:42 [WARNING] Can’t open HID tablet 0x056A 0x00D8 0x000D 0x0001
2020-04-21 00:57:42 [INFO] >> Name «Wacom CTH-661(A)»
2020-04-21 00:57:42 [INFO] >> ReportLength 9
2020-04-21 00:57:42 [INFO] >> DetectMask 0x40
2020-04-21 00:57:42 [INFO] >> MaxX 21648
2020-04-21 00:57:42 [INFO] >> MaxY 13700
2020-04-21 00:57:42 [INFO] >> MaxPressure 1023
2020-04-21 00:57:42 [INFO] >> Width 216.480
2020-04-21 00:57:42 [INFO] >> Height 137.000
2020-04-21 00:57:42 [INFO] >> InitFeature 0x02 0x02
2020-04-21 00:57:42 [INFO] >> # Wacom CTH-661SE
2020-04-21 00:57:42 [INFO] >> Tablet 0x056A 0x00DB 0xFF0D 0x0001
2020-04-21 00:57:42 [WARNING] Can’t open HID tablet 0x056A 0x00DB 0xFF0D 0x0001
2020-04-21 00:57:42 [INFO] >> Tablet 0x056A 0x00DB 0x000D 0x0001
2020-04-21 00:57:42 [WARNING] Can’t open HID tablet 0x056A 0x00DB 0x000D 0x0001
2020-04-21 00:57:42 [INFO] >> Name «Wacom CTH-661SE»
2020-04-21 00:57:42 [INFO] >> ReportLength 9
2020-04-21 00:57:42 [INFO] >> DetectMask 0x40
2020-04-21 00:57:42 [INFO] >> MaxX 21648
2020-04-21 00:57:42 [INFO] >> MaxY 13700
2020-04-21 00:57:42 [INFO] >> MaxPressure 1023
2020-04-21 00:57:42 [INFO] >> Width 216.480
2020-04-21 00:57:42 [INFO] >> Height 137.000
2020-04-21 00:57:42 [INFO] >> InitFeature 0x02 0x02
2020-04-21 00:57:42 [INFO] >> # Wacom CTH-670
2020-04-21 00:57:42 [INFO] >> Tablet 0x056A 0x00DF 0xFF0D 0x0001
2020-04-21 00:57:42 [WARNING] Can’t open HID tablet 0x056A 0x00DF 0xFF0D 0x0001
2020-04-21 00:57:42 [INFO] >> Tablet 0x056A 0x00DF 0x000D 0x0001
2020-04-21 00:57:42 [WARNING] Can’t open HID tablet 0x056A 0x00DF 0x000D 0x0001
2020-04-21 00:57:42 [INFO] >> Name «Wacom CTH-670»
2020-04-21 00:57:42 [INFO] >> ReportLength 10
2020-04-21 00:57:42 [INFO] >> DetectMask 0x40
2020-04-21 00:57:42 [INFO] >> MaxX 21648
2020-04-21 00:57:42 [INFO] >> MaxY 13700
2020-04-21 00:57:42 [INFO] >> MaxPressure 1023
2020-04-21 00:57:42 [INFO] >> Width 216.480
2020-04-21 00:57:42 [INFO] >> Height 137.000
2020-04-21 00:57:42 [INFO] >> InitFeature 0x02 0x02
2020-04-21 00:57:42 [INFO] >> # Wacom CTH-680
2020-04-21 00:57:42 [INFO] >> Tablet 0x056A 0x0303 0xFF0D 0x0001
2020-04-21 00:57:42 [WARNING] Can’t open HID tablet 0x056A 0x0303 0xFF0D 0x0001
2020-04-21 00:57:42 [INFO] >> Tablet 0x056A 0x0303 0x000D 0x0001
2020-04-21 00:57:42 [WARNING] Can’t open HID tablet 0x056A 0x0303 0x000D 0x0001
2020-04-21 00:57:42 [INFO] >> Name «Wacom CTH-680»
2020-04-21 00:57:42 [INFO] >> ReportLength 10
2020-04-21 00:57:42 [INFO] >> DetectMask 0x40
2020-04-21 00:57:42 [INFO] >> MaxX 21600
2020-04-21 00:57:42 [INFO] >> MaxY 13500
2020-04-21 00:57:42 [INFO] >> MaxPressure 1023
2020-04-21 00:57:42 [INFO] >> Width 216.000
2020-04-21 00:57:42 [INFO] >> Height 135.000
2020-04-21 00:57:42 [INFO] >> InitFeature 0x02 0x02
2020-04-21 00:57:42 [INFO] >> # Wacom CTH-690
2020-04-21 00:57:42 [INFO] >> Tablet 0x056A 0x033E 0xFF0D 0x0001
2020-04-21 00:57:42 [WARNING] Can’t open HID tablet 0x056A 0x033E 0xFF0D 0x0001
2020-04-21 00:57:42 [INFO] >> Tablet 0x056A 0x033E 0x000D 0x0001
2020-04-21 00:57:42 [WARNING] Can’t open HID tablet 0x056A 0x033E 0x000D 0x0001
2020-04-21 00:57:42 [INFO] >> Name «Wacom CTH-690»
2020-04-21 00:57:42 [INFO] >> ReportLength 10
2020-04-21 00:57:42 [INFO] >> DetectMask 0x40
2020-04-21 00:57:42 [INFO] >> MaxX 21600
2020-04-21 00:57:42 [INFO] >> MaxY 13500
2020-04-21 00:57:42 [INFO] >> MaxPressure 2047
2020-04-21 00:57:42 [INFO] >> Width 216.000
2020-04-21 00:57:42 [INFO] >> Height 135.000
2020-04-21 00:57:42 [INFO] >> InitFeature 0x02 0x02
2020-04-21 00:57:42 [INFO] >> Type WacomIntuos
2020-04-21 00:57:42 [INFO] >> # Wacom CTE-450
2020-04-21 00:57:42 [INFO] >> Tablet 0x056A 0x0017 0xFF0D 0x0001
2020-04-21 00:57:42 [WARNING] Can’t open HID tablet 0x056A 0x0017 0xFF0D 0x0001
2020-04-21 00:57:42 [INFO] >> Tablet 0x056A 0x0017 0x000D 0x0001
2020-04-21 00:57:42 [WARNING] Can’t open HID tablet 0x056A 0x0017 0x000D 0x0001
2020-04-21 00:57:42 [INFO] >> Name «Wacom CTE-450»
2020-04-21 00:57:42 [INFO] >> ReportLength 9
2020-04-21 00:57:42 [INFO] >> DetectMask 0x00
2020-04-21 00:57:42 [INFO] >> MaxX 14760
2020-04-21 00:57:42 [INFO] >> MaxY 9225
2020-04-21 00:57:42 [INFO] >> MaxPressure 511
2020-04-21 00:57:42 [INFO] >> Width 147.600
2020-04-21 00:57:42 [INFO] >> Height 92.250
2020-04-21 00:57:42 [INFO] >> InitFeature 0x02 0x02
2020-04-21 00:57:42 [INFO] >> # Wacom CTE-650
2020-04-21 00:57:42 [INFO] >> Tablet 0x056A 0x0018 0xFF0D 0x0001
2020-04-21 00:57:42 [WARNING] Can’t open HID tablet 0x056A 0x0018 0xFF0D 0x0001
2020-04-21 00:57:42 [INFO] >> Tablet 0x056A 0x0018 0x000D 0x0001
2020-04-21 00:57:42 [WARNING] Can’t open HID tablet 0x056A 0x0018 0x000D 0x0001
2020-04-21 00:57:42 [INFO] >> Name «Wacom CTE-650»
2020-04-21 00:57:42 [INFO] >> ReportLength 9
2020-04-21 00:57:42 [INFO] >> DetectMask 0x00
2020-04-21 00:57:42 [INFO] >> MaxX 21648
2020-04-21 00:57:42 [INFO] >> MaxY 13530
2020-04-21 00:57:42 [INFO] >> MaxPressure 511
2020-04-21 00:57:42 [INFO] >> Width 216.480
2020-04-21 00:57:42 [INFO] >> Height 135.300
2020-04-21 00:57:42 [INFO] >> InitFeature 0x02 0x02
2020-04-21 00:57:42 [INFO] >> #
2020-04-21 00:57:42 [INFO] >> # Automatically generated Wacom tablet configurations (37):
2020-04-21 00:57:42 [INFO] >> # PTK-450, PTK-650, PTH-450, PTH-451, PTH-650, PTH-651, PTH-850, PTH-851,
2020-04-21 00:57:42 [INFO] >> # MTE-450, CTT-460, CTL-460, CTL-470, CTL-471, CTL-472, CTL-480, CTL-490,
2020-04-21 00:57:42 [INFO] >> # CTL-660, CTL-671, CTL-672, CTL-680, CTL-690, CTH-460(A), CTH-461(A), CTH-461SE,
2020-04-21 00:57:42 [INFO] >> # CTH-460, CTH-461, CTH-470, CTH-480, CTH-490, CTH-661, CTH-661(A), CTH-661SE,
2020-04-21 00:57:42 [INFO] >> # CTH-670, CTH-680, CTH-690, CTE-450, CTE-650
2020-04-21 00:57:42 [INFO] >> #
2020-04-21 00:57:42 [INFO] / End of ‘config\wacom.cfg’
2020-04-21 00:57:42 [INFO] >> Include «config\user.cfg»
2020-04-21 00:57:42 [INFO] \ Reading ‘config\user.cfg’
2020-04-21 00:57:42 [INFO] / End of ‘config\user.cfg’
2020-04-21 00:57:42 [INFO] / End of ‘config/init.cfg’
2020-04-21 00:57:42 [INFO] >> HIDList
2020-04-21 00:57:42 [HIDDevice] [DEBUG] HID Device: Vendor: ‘Ducky’ Product: ‘Ducky One2 Mini RGB’
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Vendor Id: 0x0416, Product Id: 0x0123
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Usage Page: 0x000C, Usage: 0x0001
2020-04-21 00:57:42 [HIDDevice] [DEBUG] FeatureLen: 0, InputLen: 5, OutputLen: 0
2020-04-21 00:57:42 [HIDDevice] [DEBUG]
2020-04-21 00:57:42 [HIDDevice] [DEBUG] HID Device: Vendor: ‘SINOWEALTH’ Product: ‘Wired Gaming Mouse’
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Vendor Id: 0x258A, Product Id: 0x0033
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Usage Page: 0x000C, Usage: 0x0001
2020-04-21 00:57:42 [HIDDevice] [DEBUG] FeatureLen: 0, InputLen: 4, OutputLen: 0
2020-04-21 00:57:42 [HIDDevice] [DEBUG]
2020-04-21 00:57:42 [HIDDevice] [DEBUG] HID Device: Vendor: ‘SINOWEALTH’ Product: ‘Wired Gaming Mouse’
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Vendor Id: 0x258A, Product Id: 0x0033
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Usage Page: 0xFF00, Usage: 0x0001
2020-04-21 00:57:42 [HIDDevice] [DEBUG] FeatureLen: 520, InputLen: 0, OutputLen: 0
2020-04-21 00:57:42 [HIDDevice] [DEBUG]
2020-04-21 00:57:42 [HIDDevice] [DEBUG] HID Device: Vendor: ‘SINOWEALTH’ Product: ‘Wired Gaming Mouse’
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Vendor Id: 0x258A, Product Id: 0x0033
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Usage Page: 0xFF00, Usage: 0x0001
2020-04-21 00:57:42 [HIDDevice] [DEBUG] FeatureLen: 0, InputLen: 8, OutputLen: 0
2020-04-21 00:57:42 [HIDDevice] [DEBUG]
2020-04-21 00:57:42 [HIDDevice] [DEBUG] HID Device: Vendor: ‘UGTABLET’ Product: ‘6 inch PenTablet’
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Vendor Id: 0x28BD, Product Id: 0x0914
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Usage Page: 0xFF0A, Usage: 0x0001
2020-04-21 00:57:42 [HIDDevice] [DEBUG] FeatureLen: 0, InputLen: 12, OutputLen: 12
2020-04-21 00:57:42 [HIDDevice] [DEBUG]
2020-04-21 00:57:42 [HIDDevice] [DEBUG] HID Device: Vendor: ‘SINOWEALTH’ Product: ‘Wired Gaming Mouse’
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Vendor Id: 0x258A, Product Id: 0x0033
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Usage Page: 0xFF00, Usage: 0x0001
2020-04-21 00:57:42 [HIDDevice] [DEBUG] FeatureLen: 6, InputLen: 0, OutputLen: 0
2020-04-21 00:57:42 [HIDDevice] [DEBUG]
2020-04-21 00:57:42 [HIDDevice] [DEBUG] HID Device: Vendor: ‘DJP Inc.’ Product: ‘Virtual Multitouch Device’
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Vendor Id: 0x00FF, Product Id: 0xBACC
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Usage Page: 0x0000, Usage: 0x000E
2020-04-21 00:57:42 [HIDDevice] [DEBUG] FeatureLen: 3, InputLen: 0, OutputLen: 0
2020-04-21 00:57:42 [HIDDevice] [DEBUG]
2020-04-21 00:57:42 [HIDDevice] [DEBUG] HID Device: Vendor: ‘DJP Inc.’ Product: ‘Virtual Multitouch Device’
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Vendor Id: 0x00FF, Product Id: 0xBACC
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Usage Page: 0x000D, Usage: 0x0001
2020-04-21 00:57:42 [HIDDevice] [DEBUG] FeatureLen: 0, InputLen: 8, OutputLen: 0
2020-04-21 00:57:42 [HIDDevice] [DEBUG]
2020-04-21 00:57:42 [HIDDevice] [DEBUG] HID Device: Vendor: ‘DJP Inc.’ Product: ‘Virtual Multitouch Device’
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Vendor Id: 0x00FF, Product Id: 0xBACC
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Usage Page: 0xFF00, Usage: 0x0001
2020-04-21 00:57:42 [HIDDevice] [DEBUG] FeatureLen: 0, InputLen: 65, OutputLen: 65
2020-04-21 00:57:42 [HIDDevice] [DEBUG]
2020-04-21 00:57:42 [HIDDevice] [DEBUG] HID Device: Vendor: ‘DJP Inc.’ Product: ‘Virtual Multitouch Device’
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Vendor Id: 0x00FF, Product Id: 0xBACC
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Usage Page: 0xFF00, Usage: 0x0002
2020-04-21 00:57:42 [HIDDevice] [DEBUG] FeatureLen: 0, InputLen: 33, OutputLen: 65
2020-04-21 00:57:42 [HIDDevice] [DEBUG]
2020-04-21 00:57:42 [HIDDevice] [DEBUG] HID Device: Vendor: ‘DJP Inc.’ Product: ‘Virtual Multitouch Device’
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Vendor Id: 0x00FF, Product Id: 0xBACC
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Usage Page: 0x0000, Usage: 0x000E
2020-04-21 00:57:42 [HIDDevice] [DEBUG] FeatureLen: 3, InputLen: 0, OutputLen: 0
2020-04-21 00:57:42 [HIDDevice] [DEBUG]
2020-04-21 00:57:42 [HIDDevice] [DEBUG] HID Device: Vendor: ‘DJP Inc.’ Product: ‘Virtual Multitouch Device’
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Vendor Id: 0x00FF, Product Id: 0xBACC
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Usage Page: 0x000D, Usage: 0x0001
2020-04-21 00:57:42 [HIDDevice] [DEBUG] FeatureLen: 0, InputLen: 8, OutputLen: 0
2020-04-21 00:57:42 [HIDDevice] [DEBUG]
2020-04-21 00:57:42 [HIDDevice] [DEBUG] HID Device: Vendor: ‘DJP Inc.’ Product: ‘Virtual Multitouch Device’
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Vendor Id: 0x00FF, Product Id: 0xBACC
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Usage Page: 0xFF00, Usage: 0x0001
2020-04-21 00:57:42 [HIDDevice] [DEBUG] FeatureLen: 0, InputLen: 65, OutputLen: 65
2020-04-21 00:57:42 [HIDDevice] [DEBUG]
2020-04-21 00:57:42 [HIDDevice] [DEBUG] HID Device: Vendor: ‘DJP Inc.’ Product: ‘Virtual Multitouch Device’
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Vendor Id: 0x00FF, Product Id: 0xBACC
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Usage Page: 0xFF00, Usage: 0x0002
2020-04-21 00:57:42 [HIDDevice] [DEBUG] FeatureLen: 0, InputLen: 33, OutputLen: 65
2020-04-21 00:57:42 [HIDDevice] [DEBUG]
2020-04-21 00:57:42 [HIDDevice] [DEBUG] HID Device: Vendor: ‘DJP Inc.’ Product: ‘Virtual Multitouch Device’
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Vendor Id: 0x00FF, Product Id: 0xBACC
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Usage Page: 0x0000, Usage: 0x000E
2020-04-21 00:57:42 [HIDDevice] [DEBUG] FeatureLen: 3, InputLen: 0, OutputLen: 0
2020-04-21 00:57:42 [HIDDevice] [DEBUG]
2020-04-21 00:57:42 [HIDDevice] [DEBUG] HID Device: Vendor: ‘DJP Inc.’ Product: ‘Virtual Multitouch Device’
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Vendor Id: 0x00FF, Product Id: 0xBACC
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Usage Page: 0x000D, Usage: 0x0001
2020-04-21 00:57:42 [HIDDevice] [DEBUG] FeatureLen: 0, InputLen: 8, OutputLen: 0
2020-04-21 00:57:42 [HIDDevice] [DEBUG]
2020-04-21 00:57:42 [HIDDevice] [DEBUG] HID Device: Vendor: ‘DJP Inc.’ Product: ‘Virtual Multitouch Device’
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Vendor Id: 0x00FF, Product Id: 0xBACC
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Usage Page: 0xFF00, Usage: 0x0001
2020-04-21 00:57:42 [HIDDevice] [DEBUG] FeatureLen: 0, InputLen: 65, OutputLen: 65
2020-04-21 00:57:42 [HIDDevice] [DEBUG]
2020-04-21 00:57:42 [HIDDevice] [DEBUG] HID Device: Vendor: ‘DJP Inc.’ Product: ‘Virtual Multitouch Device’
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Vendor Id: 0x00FF, Product Id: 0xBACC
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Usage Page: 0xFF00, Usage: 0x0002
2020-04-21 00:57:42 [HIDDevice] [DEBUG] FeatureLen: 0, InputLen: 33, OutputLen: 65
2020-04-21 00:57:42 [HIDDevice] [DEBUG]
2020-04-21 00:57:42 [HIDDevice] [DEBUG] HID Device: Vendor: ‘DJP Inc.’ Product: ‘Virtual Multitouch Device’
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Vendor Id: 0x00FF, Product Id: 0xBACC
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Usage Page: 0x0000, Usage: 0x000E
2020-04-21 00:57:42 [HIDDevice] [DEBUG] FeatureLen: 3, InputLen: 0, OutputLen: 0
2020-04-21 00:57:42 [HIDDevice] [DEBUG]
2020-04-21 00:57:42 [HIDDevice] [DEBUG] HID Device: Vendor: ‘DJP Inc.’ Product: ‘Virtual Multitouch Device’
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Vendor Id: 0x00FF, Product Id: 0xBACC
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Usage Page: 0x000D, Usage: 0x0001
2020-04-21 00:57:42 [HIDDevice] [DEBUG] FeatureLen: 0, InputLen: 8, OutputLen: 0
2020-04-21 00:57:42 [HIDDevice] [DEBUG]
2020-04-21 00:57:42 [HIDDevice] [DEBUG] HID Device: Vendor: ‘DJP Inc.’ Product: ‘Virtual Multitouch Device’
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Vendor Id: 0x00FF, Product Id: 0xBACC
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Usage Page: 0xFF00, Usage: 0x0001
2020-04-21 00:57:42 [HIDDevice] [DEBUG] FeatureLen: 0, InputLen: 65, OutputLen: 65
2020-04-21 00:57:42 [HIDDevice] [DEBUG]
2020-04-21 00:57:42 [HIDDevice] [DEBUG] HID Device: Vendor: ‘DJP Inc.’ Product: ‘Virtual Multitouch Device’
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Vendor Id: 0x00FF, Product Id: 0xBACC
2020-04-21 00:57:42 [HIDDevice] [DEBUG] Usage Page: 0xFF00, Usage: 0x0002
2020-04-21 00:57:42 [HIDDevice] [DEBUG] FeatureLen: 0, InputLen: 33, OutputLen: 65
2020-04-21 00:57:42 [HIDDevice] [DEBUG]
2020-04-21 00:57:42 [INFO]
2020-04-21 00:57:42 [INFO] Driver version: 0.1.5.5 Devocub Edition
2020-04-21 00:57:42 [INFO] Windows version: Microsoft Windows NT 6.2.9200.0
2020-04-21 00:57:42 [INFO] Windows product: Windows 10 Home
2020-04-21 00:57:42 [INFO] Windows release: 1909
2020-04-21 00:57:42 [INFO]
2020-04-21 00:57:42 [INFO] >> CheckTablet
2020-04-21 00:57:42 [ERROR] Tablet not found!
2020-04-21 00:57:42 [ERROR] Check the list of supported tablets from the GitHub page.
2020-04-21 00:57:42 [ERROR] http://github.com/hawku/TabletDriver
Driver stopped. Restarting!

HongClarence commented Apr 21, 2020

Did you save the tablet.cfg file before trying? If you did and it still isn’t working, try replacing the file with the on i posted

HongClarence commented Apr 21, 2020

Hm, I am unable to see what’s the problem. It just seems that your tablet isn’t being detected even though all the id matches. Have you tried just uninstalling everything and redownloading all the files again?

HongClarence commented Apr 21, 2020

Does your tablet work with the default driver by xp-pen? Sorry for the dumb questions just want to make sure that i get as much info as possible to help u

HongClarence commented Apr 21, 2020

Did you install the hardware update for the tablet? The one from xp-pen

HongClarence commented Apr 21, 2020

Yup firmware update

schmoqz commented Apr 22, 2020

HongClarence commented Apr 23, 2020

HongClarence commented Apr 25, 2020

The only other solution that i can think of is to contact the xp-pen customer support and tell them about the missing serial number, thought i doubt they will actually help since this driver is not by them

JOJOx408 commented May 7, 2020

Hi, after poking around for 3 hours I finally got it to work. Head to the config folder, edit the tablet.cfg with notepad or anything similar and paste this

XP-Pen G640

or just replace the tablet.cfg file with this, remember to change the txt file into cfg.
tablet.txt

Thank you so much it finally works!

Ch3zZz commented Jun 2, 2020

Hi, after poking around for 3 hours I finally got it to work. Head to the config folder, edit the tablet.cfg with notepad or anything similar and paste this

XP-Pen G640

or just replace the tablet.cfg file with this, remember to change the txt file into cfg.
tablet.txt

JustaPeriod commented Jun 4, 2020

@hawku @InfinityGhost @AbdShullah You should add this revision to your latest driver builds, can confirm that a friend of mine bought a new tablet off amazon and got this model of it, requiring the config above.

InfinityGhost commented Jun 4, 2020

@hawku @InfinityGhost @AbdShullah You should add this revision to your latest driver builds, can confirm that a friend of mine bought a new tablet off amazon and got this model of it, requiring the config above.

afaik @AbdShullah already has added the revision to his repo, I haven’t done anything because I’m no longer developing my fork in favor of my own project.

Psyite commented Jun 27, 2020

Hello! Thank you for your config changes, it has allowed me to use my tablet (G640) for osu! but, I have one problem, I’m getting cursor lag whenever I use this config with the hawku drivers. (I’ve tried everything, reinstalling drivers, tweaking settings like FPS and resolution in osu! etc,) The lag only occurs when I move my cursor slowly (like a small jump or spinner) my cursor would randomly jump and freeze making it extremely hard for me to do small jump sections on maps or do spinners, however I can do big jumps accurately. I have used my tablet with the XP-Pen Official drivers and it worked fine. (aside from it being Official drivers, my cursor would sway, but i could still somewhat play and there was no cursor lag) The closest fix I’ve had to this problem is experimenting with the smoothing filter, it has somewhat stopped the cursor lag but it feels too slow and clunky and it’s not a 100% fix either, also, this problem isn’t specifically an osu! problem (lag still occurs even if I’m not tabbed into osu!)

I can provide screenshots and recordings if need be, I have searched around the internet and couldn’t find an accurate fix to my problem, it seems that I’m the only person with this problem as reviews on the tablet have not mentioned this problem. It’s most annoying as I have previously used the Huion 420 with the hawku drivers and I had no cursor lag and gameplay felt perfect (switched for a bigger tablet with a better pen)

I’m not sure if area size or anything like that matters but I’ve attached what I’m using now to play osu! (Area size, Smoothing filter settings, etc) I’d really appreciate it if you could help as this is making me pretty annoyed.

Psyite commented Jun 28, 2020

Okay, so I’ve found what the problem is. I experimented with changing my area size and presto! The glitching stopped, so I’ve switched from 7cm to 10cm and after getting used to it, I got some good plays.

Apologies if I wasted any ones time.

AvevoN commented Aug 18, 2020

Hi, after poking around for 3 hours I finally got it to work. Head to the config folder, edit the tablet.cfg with notepad or anything similar and paste this

XP-Pen G640

or just replace the tablet.cfg file with this, remember to change the txt file into cfg.
tablet.txt

Thank you so much.

rasters10 commented Aug 20, 2020

Hi, after poking around for 3 hours I finally got it to work. Head to the config folder, edit the tablet.cfg with notepad or anything similar and paste this

XP-Pen G640

or just replace the tablet.cfg file with this, remember to change the txt file into cfg.
tablet.txt

Thank you so much, i tried everything and it doesn’t work, but after this my tablet with connected!

Support Request: an different version UGEE M708 (may XP-PEN M708) #1201

Comments

waitlamp commented Jun 19, 2021 •

hello,
I have a newly bought UGEE M708
I noticed in issue #430
there is an configuration file

however my M708 have entirely different Vendor ID and Product ID

After copy an Deco 01 v2 configuration file, and modified DeviceString
«DeviceStrings»: < "4": "UG902_BPG1006" >.

my tablet can be detected.

The work area has a little problem, use default configuration, cursor can’t move to the bottom of screen, like

and the debugger

so how should I adjust configuration file to support my M708 further, make work area correct?

and how to test if tilt is work?

is it possible to support this new version M708?

And my configuration file (edited DeviceString and name from XP-PEN deco 01 v2)

The text was updated successfully, but these errors were encountered:

Best settings for XP-Pen G640S for osu? #393

Comments

KaetoKit commented Mar 25, 2019

What are the best settings for the XP-Pen G640S with this driver? Do I turn on Anti-smoothing Filter or Noise Reduction Filter?

Hardware/software information

Windows Version: 10

Tablet Driver version: 0.2.3

Tablet model: XP-Pen G640S

The text was updated successfully, but these errors were encountered:

InfinityGhost commented Mar 25, 2019

That comes down to preference in all honesty, but generally the lowest latency is the best to-go for any player. Adding the anti-smoothing filter or the noise reduction adds additional latency, but helps in the case you have a shaky cursor or just prefer smoother movements.

KaetoKit commented Mar 25, 2019

That comes down to preference in all honesty, but generally the lowest latency is the best to-go for any player. Adding the anti-smoothing filter or the noise reduction adds additional latency, but helps in the case you have a shaky cursor or just prefer smoother movements.

So would the best to-go be no filters? That’s what I have right now 🙂 I want the lowest latency.

Tablet driver что это

WTClient.exe — это исполняемый файл (программа) для Windows. Расширение имени файла .exe — это аббревиатура от англ. слова executable — исполнимый. Необходимо запускать исполняемые файлы от проверенных производителей программ, потому что исполняемые файлы могут потенциально изменить настройки компьютера или нанести вред вашему компьютеру. Бесплатный форум с информацией о файлах может помочь вам разобраться является ли WTClient.exe вирусом, трояном, программой-шпионом, рекламой, которую вы можете удалить, или файл принадлежит системе Windows или приложению, которому можно доверять.

Вот так, вы сможете исправить ошибки, связанные с WTClient.exe

Информация о файле WTClient.exe

Описание: WTClient.exe не является важным для Windows и часто вызывает проблемы. Файл WTClient.exe находится в папке C:WindowsSystem32 или иногда в подпапках C:Windows. Известны следующие размеры файла для Windows 10/8/7/XP 32,768 байт (50% всех случаев), 40,960 байт, 41,280 байт или 40,680 байт.
Процесс начинает работать вместе с Windows (Смотрите ключ реестра: MACHINERun ). Это не системный файл Windows. Это неизвестный файл в папке Windows. Приложение не видно пользователям. Поэтому технический рейтинг надежности 52% опасности.

Важно: Некоторые вредоносные программы маскируют себя как WTClient.exe. Таким образом, вы должны проверить файл WTClient.exe на вашем ПК, чтобы убедиться, что это угроза. Мы рекомендуем Security Task Manager для проверки безопасности вашего компьютера.

Комментарий пользователя

РивЭто файл планшета (пера), не является вирусом, но перегружает систему.
Наталья

Лучшие практики для исправления проблем с WTClient

Аккуратный и опрятный компьютер — это главное требование для избежания проблем с WTClient. Для этого требуется регулярная проверка компьютера на вирусы, очистка жесткого диска, используя cleanmgr и sfc /scannow, удаление программ, которые больше не нужны, проверка программ, которые запускаются при старте Windows (используя msconfig) и активация Автоматическое обновление Windows. Всегда помните о создании периодических бэкапов, или в крайнем случае о создании точек восстановления.

Если у вас актуальные проблемы, попробуйте вспомнить, что вы делали в последнее время, или последнюю программу, которую вы устанавливали перед тем, как появилась впервые проблема. Используйте команду resmon, чтобы определить процесс, который вызывает проблемы. Даже если у вас серьезные проблемы с компьютером, прежде чем переустанавливать Windows, лучше попробуйте восстановить целостность установки ОС или для Windows 8 и более поздних версий Windows выполнить команду DISM.exe /Online /Cleanup-image /Restorehealth. Это позволит восстановить операционную систему без потери данных.

Следующие программы могут вам помочь для анализа процесса WTClient.exe на вашем компьютере: Security Task Manager отображает все запущенные задания Windows, включая встроенные скрытые процессы, такие как мониторинг клавиатуры и браузера или записей автозагрузки. Уникальная оценка рисков безопасности указывает на вероятность процесса быть потенциально опасным — шпионской программой, вирусом или трояном. Malwarebytes Anti-Malware определяет и удаляет бездействующие программы-шпионы, рекламное ПО, трояны, кейлоггеры, вредоносные программы и трекеры с вашего жесткого диска.

WTClient сканер

Security Task Manager показывает все запущенные сервисы Windows, включая внедренные скрытые приложения (например, мониторинг клавиатуры или браузера, авто вход). Уникальный рейтинг надежности указывает на вероятность того, что процесс потенциально может быть вредоносной программой-шпионом, кейлоггером или трояном.

Бесплатный aнтивирус находит и удаляет неактивные программы-шпионы, рекламу, трояны, кейлоггеры, вредоносные и следящие программы с вашего жесткого диска. Идеальное дополнение к Security Task Manager.

Reimage бесплатное сканирование, очистка, восстановление и оптимизация вашей системы.

Frequently Asked Questions

Q: Where is the left handed mode?

Enable the «Left handed (Inverted)» option and set the rotation to 0 degrees.

Q: Why is the cursor shaking?

Small amount of shaking is to be expected with this driver, even when the pen is stationary.

You can enable the noise filter to reduce the amount of shaking.

Q: What does the smoothing filter do?

Smoothing filter calculates average cursor position.

The filter latency value is an approximation of how much time it will take the cursor to reach the current pen position.

Higher latency will smooth out the cursor movement, but limits how fast the cursor can change the position.

Filter latency value between 15 and 25 milliseconds should be close to some Wacom drivers.

Default rate for the smoothing calculation is 250 Hz, so it should show 250 packets/sec in the osu! raw input settings.

It is possible to set the rate to 1000 Hz, but lower end computers might have problems with the higher update rates.

Q: Driver Stopped, Restarting! Tablet not found! Init failed!

Check the GitHub issues #1 and #35

Q: I’ve installed VMulti driver, but i get an error: «Can’t open VMulti device»

VMulti driver is from the XP-Pen’s installation package so you could try this:

Q: Why my cursor doesn’t reach the edges of the screen?

You might have incorrect screen mapping settings.

If you are sure that settings are correct, you should check this: https://github.com/hawku/TabletDriver/issues/4

If the problem only occurs in osu!, then disable the «Map absolute raw input to osu! window» from the osu’s settings.

Q: I have read this FAQ, but i still have a problem with the driver!

Приобрёл я недавно планшет One by Wacom (CTL-671), установил драйвер с диска, сделал всё по инструкции и ничего не запускается.

Пишет следующее: «Драйвер планшета не отвечает».

Открываем центр управления, а планшета в списке нет.

Смотрим как распознаётся планшет компьютером и видим, что Wacom Tablet нормально распознаётся.

Проведя 18 часов в пытках попытках запустить драйвер до меня дошел слух, что надо устанавливать в дефолтный каталог. У меня же он был через реестр изменён на диск D, чтобы системный раздел не засорялся.

Но даже после установки в каталог «Program Files (x86)» он не запускался. И тогда я обратился к программе от майкрософта «Process Monitor» и стал следить за поведением драйвера и тут выяснилась очень любопытная вещь… (помимо того, что в логах установки фигурирует очень много несуществующих файлов и ошибок связанных с этим)

Драйвер вдруг попытался найти два файла. Один не существует, а другой находится в совсем другом каталоге «Program Files», из чего делаю вывод, что разработчики этого драйвера прямо указали куда обращаться к драйверу, но никак не влияли на сам процесс установки. В подтверждение позже заметил обращения к еще одному файлу так же по строго указанному пути.

Из этого выходит, что драйвер Wacom должен находится строго по адресу: C:Program FilesTablet и нигде иначе.

Что делать?

Только такие процессы как на скриншоте должны остаться в системе после переустановки драйвера (актуально для версии 6.3.31).

Так же советую открыть «Утилиту для работы с файлами планшета Wacom» и удалить настройки всех пользователей.

Теперь планшет можно подключить, он установится и откроется приветственное окно Wacom!

Так или иначе драйвер продолжает обращаться к файлу «TabletWacomWTabletServicePro.ilk«, которого не существует и какую роль он играет я не понимаю, если у кого есть этот файл — дайте знать.

Дополнительные проблемы:
Планшет может перестать работать — опять накрылся драйвер. Его необходимо перезагрузить не отключая планшет.

В интернете предлагается создать файл «любоеназвание.cmd»

И в него прописать:

(Для серии Bamboo)

Это такой быстрый способ для перезапуска драйвера. Планшет вновь опознается и откроется окно управления. Но я думаю надо для сервиса создать событие запуска/перезапуска при подключении планшета к компьютеру.

Данная статья не подлежит комментированию, поскольку её автор ещё не является полноправным участником сообщества. Вы сможете связаться с автором только после того, как он получит приглашение от кого-либо из участников сообщества. До этого момента его username будет скрыт псевдонимом.

Ой, у вас баннер убежал!

Это «Песочница» — раздел, в который попадают дебютные посты пользователей, желающих стать полноправными участниками сообщества.

Если у вас есть приглашение, отправьте его автору понравившейся публикации — тогда её смогут прочитать и обсудить все остальные пользователи Хабра.

Чтобы исключить предвзятость при оценке, все публикации анонимны, псевдонимы показываются случайным образом.

Reduce Your Tablet Latency! (2022 osu! open tablet driver guide)

Reshiver

feel free to comment if you have any problem and im sorry for the thumbnail kekW 🙂

Is there a way to keep your regular wacom drivers as well, since I use my tablet for drawing as well

how did you make your windows home screen look like that?

Bruh i expected some actual tips on reducing latency, just getting drivers won’t guarantee you the reduce of latency.
Do some research about Windows Ink, raw input, acceleration etc.
The video should be called «How to install Open Tablet Driver».

it weird because i get no tutorial and my tablet can’t be detected, i was using it few months ago and i stopped to play osu, i reinstall it today and see it not working at all even if i remove my other driver

it keeps saying i need to install missing frameworks but ive done it multiple times

nigga u cant be talking bout mf latency nigga when you got da custom logos, animated background, world of world craft open, aspect ratio on, nigga. what da hell?

I have the same tablet as you but the driver ain’t letting me save/apply the changes. Any idea? its detected and all

do I have to uninstall wacom drivers while using this or is there a way to disable them? ty

I have an S620, and its not detecting the tablet. Do you know a fix for this situation?

OpenTabletDriver / OpenTabletDriver Goto Github PK

Open source, cross-platform, user-mode tablet driver

License: GNU Lesser General Public License v3.0

OpenTabletDriver’s Introduction

All statuses of tablets that are supported, untested, and planned to be supported can be found here. Common issue workarounds can be found in the wiki for your platform.

Running OpenTabletDriver binaries

Building OpenTabletDriver from source

The requirements to build OpenTabletDriver are consistent across all platforms. Running OpenTabletDriver on each platform requires different dependencies.

Run build.ps1 to produce binary builds to ‘bin’ folder. These builds will run in portable mode by default.

Required packages (some packages may be pre-installed for your distribution)

To build on ARM linux, run the provided ‘build.sh’ file with the appropriate runtime provided as an argument. For arm64, this is ‘linux-arm64’.

No other dependencies.

Contributing to OpenTabletDriver

If you wish to contribute to OpenTabletDriver, check out the issue tracker. When creating pull requests, follow the guidelines outlined in our contribution guidelines.

For issues and PRs related to OpenTabletDriver’s packaging, please see the repository here.

For issues and PRs related to OpenTabletDriver’s web page, see the repository here.

Supporting a new tablet

You’re also of course welcome to open a PR adding support for it yourself, if you have a good grasp on what’s involved.

Generally this process is relatively easy, especially if it’s for a tablet manufacturer we already have support for on other tablets.

OpenTabletDriver’s People

Contributors

Stargazers

Watchers

Forkers

OpenTabletDriver’s Issues

OTD does not detect Gaomon S620 under Pop!OS 20.04 LTS

Description

Hello,
i tried to run OTD under my installation of PopOS two ways :

The second one, through the artifact linked below, which didn’t worked either. First, i had to run the daemon with sudo, but it always spat out this error :

System Information:

Offset doesn’t line up with cursor positioning when a display is left of the main display

Description

Displays to the left of the main display are not being considered when the cursor is positioned, resulting in incorrect offset positioning.

Gaomon S620 Report Rate

Description

System Information:

Option	Value
Operating System	Windows 10
Software Version	OTD v0.2.0-rc1
Tablet	Gaomon S620

Reset to default doesn’t refresh theme

Description

Resetting to default doesn’t refresh theme

Configuration overall does nothing (gaomon s620)

Description

System Information:

Option	Value
Operating System	Windows 8.1 x64
Software Version	0.20—rc1
Tablet	Gaomon s620

G640: Failed to open tablet.

Description

System Information:

——————|——————
Operating System | 10
Software Version | v0.2.0-rc1
Tablet | G640

Multiple MainWindows appear on startup

Description

Multiple MainWindows appear on startup
Edit: This only occurs when default settings are used.

System Information:

Option	Value
Operating System	Windows 10
Software Version	0.1.0-781f731
Tablet	N/A

Add Status Bar Icon

Description

Status bar icon to hide and show the window, along with other various functions.

System.InvalidOperationException on Settings Deserialization

Description

Settings serialization does not fully overwrite the file

App crash when there is no tablet connected

Description

When I open the application and there is no tablet connected it crashes.
Crash log

System Information:

Option	Value
Operating System	Windows 7 Ultimate 64 bits
Software Version	0.1.1-894eb0e
Tablet	Wacom CTH-470

Windows: Displays to left of main display are not shown

Description

Displays to the left of the main display are not included.

System Information:

Option	Value
Operating System	Windows 10
Software Version	0.1.0-0cfde57

Little proposal

u use avalonia and message box
mb u wanna use https://github.com/CreateLab/material.avalonia (material)
Like ur app)

Pressing the pen onto the tablet stops mouse movement until the pen is lifted again

Description

It would be good to be able to toggle this behavior.

System Information:

Option	Value
Operating System	Arch (Antergos) Linux x64, KDE
Software Version	v0.2.0-rc1
Tablet	Wacom PTH-451

CTH-470 only reads touch inputs

Description

CTH-470 is detected but only reads touch inputs.

System Information:

Option	Value
Software Version	git-master
Tablet	CTH-470

HidDeviceStream fails to open: Wacom CTL-480 on Windows

NullRef on DeviceReader.Dispose()

Description

Driver throws NullReferenceException on DeviceReader.Dispose()

System Information:

CTL-480 not detected when using a USB extension cable

Description

When I put the extension cable in, connection goes bye-bye.

System Information:

Option	Value
Operating System	Arch Linux x86_64 running gnome-xorg
Software Version	0.1.0? latest from AUR
Tablet	CTL-480

OSX: Displays are limited to the main display

Description

Displays are limited to the main display, hard coded that way.

System Information:

Option	Value
Operating System	macOS Mojave 10.14.5

AreaSetter control fails to update settings (Avalonia Property Binding)

Binding fails from AreaSetter.xaml to AreaSetter.xaml.cs. When saving settings, it fails to write the changes from the AreaSetter control.

[Detect:Error] Failed to get device input report length on XP-PEN G640

Description

I’ve waited some time, and recorded everything on /var/log/Xorg.0.log. These are the tablet related outputs it gave me, in case that it helps I’m pasting it below.

System Information:

Option	Value
Operating System	Pop OS 19.10 (DE: KDE Plasma 5.16.5)
Software Version	0.1.1-rc1
Tablet	XPPEN G640

Abnormal CPU usage when tablet is (dis)connected after startup

Description

Huion Kamvas Pro 13 (GT-133) : cursor not moving on screen #758

Comments

lululock71 commented Feb 5, 2021

Description

Hi,
After dealing with some detection issues (which https://github.com/InfinityGhost/OpenTabletDriver/issues/662 helped me a lot with it), the cursor does not move when using the stylus.

But, pen position, pen buttons and pressure is detected by OTD, because there’s definitively response from the tablet when looking at the tablet debugger.

Here’s my diagnostics file : diagnostics.txt

System Information:

Name	Value
Operating System	Arch Linux (xanmod-rt 5.10.9-rt24)
Software Version	v0.5.1.r32.gf039db6-1
Tablet	Huion Kamvas Pro 13 (GT-133)

The text was updated successfully, but these errors were encountered:

Mrcubix commented Feb 5, 2021 •

have you made any changes to the config? if yes, upload your current config here (or paste the content)

lululock71 commented Feb 5, 2021

Nope, config is stock. The Kamvas Pro 13 profile I created did not even work. My tablet got immediately recognized as a GT-133 (which is a profile that was already there). But the tablet outputs correctly and OTD can catch the information.

But something between processing the tablet data and moving the cursor seems to be broken.

Mrcubix commented Feb 5, 2021

Alright, we have a config for a different variation in PR, guess i’ll change it, while we are at it, i’m going to make a config for you tablet, give me 2 min

Mrcubix commented Feb 5, 2021

just to make sure, go to tablet > device string reader, input the following:
9580
109
201
send request and paste teh string here

lululock71 commented Feb 5, 2021

Apparently, the values you gave me don’t work.

But I’ve checked in the GT-133 configuration that I have, and I found that the product ID you gave me was wrong :

I noticed that the Kamvas 13 has a productID of 109 and that the Kamvas Pro 13 (AKA GT-133) has 110.
These 2 models are not the same ID-wise (they both have almost the same specifications) and should not be mistaken one for another.

Mrcubix commented Feb 5, 2021

yeah i’m quite the pepega, figuring out some stuff

Mrcubix commented Feb 5, 2021

Also just to make sure, with this config, go to tablet debugger, tell me reportID when dragging and when out of range, also try to get max position

lululock71 commented Feb 6, 2021 •

Hi,
I replaced the original GT-133 with your file and the tablet got successfully detected but still no cursor moving. Pen buttons and pressure are still working.

Using the tablet debugger, I have the following values :

Value name	Value
Max X	58645
Max Y	33048
Max pressure	8191
ReportID (out of range stylus)	0
ReportID (hovering with no pen buttons pressed)	64
ReportID (first pen button pressed)	65
ReportID (second pen button pressed)	66

Also, I noticed that the 4 first tablet buttons are registered by OTD but the slider and the fifth button (used to setup the tablet screen) are active if we look at the raw data but not registered by OTD. The fifth button is not supposed to be used as a shortcut but since it returns a press, I used it as a «free» additional shortcut key with the huion-linux-drivers script.

OpenTabletDriver/OpenTabletDriver

Use Git or checkout with SVN using the web URL.

Work fast with our official CLI. Learn more.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching Xcode

If nothing happens, download Xcode and try again.

Launching Visual Studio Code

Your codespace will open once ready.

There was a problem preparing your codespace, please try again.

Latest commit

Git stats

Files

Failed to load latest commit information.

README.md

All statuses of tablets that are supported, untested, and planned to be supported can be found here. Common issue workarounds can be found in the wiki for your platform.

Running OpenTabletDriver binaries

Building OpenTabletDriver from source

The requirements to build OpenTabletDriver are consistent across all platforms. Running OpenTabletDriver on each platform requires different dependencies.

Run build.ps1 to produce binary builds to ‘bin’ folder. These builds will run in portable mode by default.

Required packages (some packages may be pre-installed for your distribution)

To build on ARM linux, run the provided ‘build.sh’ file with the appropriate runtime provided as an argument. For arm64, this is ‘linux-arm64’.

No other dependencies.

Contributing to OpenTabletDriver

If you wish to contribute to OpenTabletDriver, check out the issue tracker. When creating pull requests, follow the guidelines outlined in our contribution guidelines.

For issues and PRs related to OpenTabletDriver’s packaging, please see the repository here.

For issues and PRs related to OpenTabletDriver’s web page, see the repository here.

Supporting a new tablet

You’re also of course welcome to open a PR adding support for it yourself, if you have a good grasp on what’s involved.

Generally this process is relatively easy, especially if it’s for a tablet manufacturer we already have support for on other tablets.

OpenTabletDriver / OpenTabletDriver Goto Github PK

Open source, cross-platform, user-mode tablet driver

License: GNU Lesser General Public License v3.0

OpenTabletDriver’s Issues

First startup puts areas at 0,0

Description

Areas aren’t centered on first startup.

AreaSetter control fails to update settings (Avalonia Property Binding)

Binding fails from AreaSetter.xaml to AreaSetter.xaml.cs. When saving settings, it fails to write the changes from the AreaSetter control.

[Detect:Error] Failed to get device input report length on XP-PEN G640

Description

I’ve waited some time, and recorded everything on /var/log/Xorg.0.log. These are the tablet related outputs it gave me, in case that it helps I’m pasting it below.

OpenTabletDriver/Plugin-Repository

Use Git or checkout with SVN using the web URL.

Work fast with our official CLI. Learn more.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching Xcode

If nothing happens, download Xcode and try again.

Launching Visual Studio Code

Your codespace will open once ready.

There was a problem preparing your codespace, please try again.

Latest commit

Git stats

Files

Failed to load latest commit information.

README.md

OpenTabletDriver Plugin Repository

This is a repository for OpenTabletDriver plugin metadata.

In order to achieve maintainability, strict directory naming is enforced.

Key	Value
Version	The supported OpenTabletDriver version
Owner	The owner of the source code repository
Repository	The name of the source code repository
Name	The name of the plugin
Tag	The release tag or revision of the source code it was built

About

Plugin repository source for OpenTabletDriver plugins

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Contributors 8

Languages

Footer

You can’t perform that action at this time.

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.

hawku / TabletDriver Goto Github PK

License: GNU General Public License v3.0

TabletDriver’s Introduction

This is a low latency graphics tablet driver that is meant to be used with rhythm game osu!

This driver has not been updated for latest Windows versions!

Please, use OpenTabletDriver:

TabletDriver’s People

Contributors

Stargazers

Watchers

Forkers

TabletDriver’s Issues

Support for CTL-460

Can run multiple instances of the driver

If you launch a 2nd instance and change the area on it, both area from instance 1 and area from instance 2 will be active and you’ll have 2 cursors. May be fixed by just maximizing the current instance when trying launch the program?

Tablet not found, I had never installed any wacom drivers on my computer

Tablet not found, I had never installed any wacom drivers on my computer, even removed Wacom tablet from device manager and it doesn’t work. I did a windows reset, didn’t work. Latest version of windows 10. Wacom Intous Ctl-480. I’ve even tried removing everything from the config and leaving just the CTL-480 bits. Still didn’t work. Please help.

Hardware/software information

Tablet Driver version:

Access is denied.

On console it just says ERROR! Can’t start driver. Access is denied.» I uninstalled old wacom drivers. Reinstalling no good either.

apo11o-M / OpenTabletDriver Goto Github PK

Open source, cross-platform, user-mode tablet driver

License: GNU Lesser General Public License v3.0

C# 99.58% Shell 0.21% PowerShell 0.22%

OpenTabletDriver’s Introduction

All statuses of tablets that are supported, untested, and planned to be supported can be found here. Common issue workarounds can be found in the wiki for your platform.

Running OpenTabletDriver binaries

Building OpenTabletDriver from source

The requirements to build OpenTabletDriver are consistent across all platforms. Running OpenTabletDriver on each platform requires different dependencies.

Run build.ps1 to produce binary builds to ‘bin’ folder. These builds will run in portable mode by default.

Required packages (some packages may be pre-installed for your distribution)

To build on ARM linux, run the provided ‘build.sh’ file with the appropriate runtime provided as an argument. For arm64, this is ‘linux-arm64’.

No other dependencies.

Contributing to OpenTabletDriver

If you wish to contribute to OpenTabletDriver, check out the issue tracker. When creating pull requests, follow the guidelines outlined in our contribution guidelines.

For issues and PRs related to OpenTabletDriver’s packaging, please see the repository here.

For issues and PRs related to OpenTabletDriver’s web page, see the repository here.

Supporting a new tablet

You’re also of course welcome to open a PR adding support for it yourself, if you have a good grasp on what’s involved.

Generally this process is relatively easy, especially if it’s for a tablet manufacturer we already have support for on other tablets.

Driver Stopped, Restarting! Tablet not found! (Wacom) #1

Comments

albixow commented Mar 12, 2018

Did message you about this on reddit but you didn’t reply eventually so thought I’d post it here too. #

Tried everything I can think of, all my Wacom drivers are uninstalled, tried restarting pc, running as admin, nothing works. Just getting the same error.

The text was updated successfully, but these errors were encountered:

hawku commented Mar 13, 2018

Uninstall the «Wacom Tablet» device from the Window Device Manager.
Check the «Delete the driver software for this device.» checkbox when uninstalling the device.

albixow commented Mar 13, 2018

Tried it, then restarted PC, installed your driver, opened the Driver GUI and still the same error.

Calideon commented Mar 13, 2018

I have same issue, but my tablet is connected. There is screeenshot of my problem: https://puu.sh/zGNnX/093324cd3b.png

brimstone- commented Mar 13, 2018 •

With TabletDriver not yet installed, I uninstalled my current driver for my H420 with that particular checkbox ticked, Windows asked me to reboot, I unplugged my tablet before reboot, installed both the main driver and the huion one, rebooted, plugged in my tablet, launched the GUI, and am still getting the same error above. I also tried the tablet.cfg change in the reddit thread.

Edit: Someone on Reddit advised this particular change in my config and now the driver works!

derekxwu commented Mar 13, 2018

Reinstalling and re-uninstalling the Wacom driver (restarting both times) helped me with this problem.

Meigs2 commented Mar 13, 2018 •

Yeah, I’m getting the same issue here. Cant fix it. Let me see if updating windows helps and I’ll report back.

Edit: Sure doesn’t

Edit 2: Yeah, I’ve done everything thats been suggested. Not sure why it isn’t working. I’m on Windows 10, CTH-480. If anyone wants to use me for info on what could be the problem send me a message or add me on discord: Meigs2#0478

Meigs2 commented Mar 14, 2018 •

WAIT Updating to the fall creators update in Windows 10 fully fixed my issues. Try FULLY updating windows for the people having this issue!

hawku commented Mar 14, 2018

@Meigs2 That is interesting. That might be the reason for these detection problems, because only few people seems to have the problem after uninstalling the drivers properly.
Are you using the latest version of the driver (0.0.13 or 0.0.14)?

Version 0.0.13 adds new tablet configurations (config\wacom.cfg), so that might have improved the Wacom tablet detection.

Please, right click the console and press Copy all and paste the «Tablet open!» part here. It should look like this:

Copy all function doesn’t work in the 0.0.13, so first you need to update the driver to version 0.0.14.

Meigs2 commented Mar 15, 2018

Nope, was using 0.0.12

dylanjerry commented Mar 26, 2018

I uninstalled all Tablet drivers and I have installed the vmulti device and reinstalled it multiple times
here is my problem

PHadaia commented Apr 3, 2018

None of the solutions here helped me. Cannot find any traces of old drivers on my pc (uninstalled and installed vmulti multiple times) still doesnt help.
Using CTL-471

melloeOsu commented Jun 16, 2018

Hey, maybe I’m just an idiot and this is a stupid quetion but..
Where is config\tablet.cfg? I can’t find it to make the proper edits to it
I use a CTL-460, and I downloaded the driver from the wacom website

BateauSD commented Aug 14, 2018

woahsia commented Oct 22, 2018

2018-10-23 00:42:23 [ERROR] Can’t open VMulti device!

2018-10-23 00:42:23 [ERROR] Possible fixes:
2018-10-23 00:42:23 [ERROR] 1) Install VMulti driver
2018-10-23 00:42:23 [ERROR] 2) Kill PentabletService.exe (XP Pen driver)
2018-10-23 00:42:23 [ERROR] 3) Uninstall other tablet drivers and reinstall VMulti driver
Driver stopped. Restarting!
2018-10-23 00:42:29 [ERROR] Can’t open VMulti device!

2018-10-23 00:42:29 [ERROR] Possible fixes:
2018-10-23 00:42:29 [ERROR] 1) Install VMulti driver
2018-10-23 00:42:29 [ERROR] 2) Kill PentabletService.exe (XP Pen driver)
2018-10-23 00:42:29 [ERROR] 3) Uninstall other tablet drivers and reinstall VMulti driver
2018-10-23 00:42:30 [ERROR] Can’t open VMulti device!

2018-10-23 00:42:30 [ERROR] Possible fixes:
2018-10-23 00:42:30 [ERROR] 1) Install VMulti driver
2018-10-23 00:42:30 [ERROR] 2) Kill PentabletService.exe (XP Pen driver)
2018-10-23 00:42:30 [ERROR] 3) Uninstall other tablet drivers and reinstall VMulti driver
Driver stopped. Restarting!

I was using an xp pen but it spoilt so I switched to my wacom cth 480. PRior to this I used the xp pen drivers, but decided to switch to these drivers for the wacom tablet. I uninstalled all my other drivers before installing this but I’m still getting these errors, nothing on this thread has helped so far

My Gaomon M10K Pro is not detected by osu and OpenTabletDriver #1520

Comments

MTGPROD commented Oct 14, 2021 •

Description

When my tablet in plugged-in osu do not detect the tablet. I have installed the Open Tablet Driver and I cleaned the old Gaomon driver leftover I restarded osu pluggled the tablet in the other usb ports of my laptop but still not detected. Only Windows 10 detects it.

System Information:

Name	Value
Operating System	Windows 10 Entreprise
OpenTabletDriver	v0.5.3.3
Tablet	Gaomon M10K Pro

The text was updated successfully, but these errors were encountered:

jamesbt365 commented Oct 14, 2021

Does the tablet say its detected in the driver itself?

If it does, but you cant use it in osu, dont run osu as admin and make sure both raw input settings are off.

If your tablet doesnt detect in otd then:
https://github.com/X9VoiD/WinUSBCleanup/releases/tag/v1.0
follow the instructions on this.

If that doesnt fix it after go ot help > export diagnosis, then save the file and send it here.

MTGPROD commented Oct 14, 2021 •

edit oh okay: Yeah it is not detected by otd I tried but nothing

MTGPROD commented Oct 14, 2021

diag.txt
here’s the diagnosis

jamesbt365 commented Oct 14, 2021

Extract this build into a folder, create a userdata folder inside with the other extracted files then you can run the ux. Make sure you current version of otd is closed during this.

If you want plugins in this version only a select few work at the moment. Refer to #1436 and https://github.com/AbstractQbit/AbstractOTDPlugins/actions/runs/1298122683

(Also you shouldn’t use the Administator account because of security problems and it breaking otd and other programs)

MTGPROD commented Oct 14, 2021

jamesbt365 commented Oct 14, 2021

Because not everything should be ran in admin, which the Administrator named account does also forcing UAC to be disabled.

If you have any questions about your tablet detecting after this, feel free to ask. If it detects and it works correctly you can close the issue.

MTGPROD commented Oct 14, 2021

UAC disabled, Windows XP vibes lol

MTGPROD commented Oct 14, 2021

Footer

You can’t perform that action at this time.

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.

osu! The BEST Tablet Driver Ever? (OpenTabletDriver)

Показать панель управления

Комментарии • 275

Turns out that the recent windows update messed with hawku and devocub as multiple people reported that both didn’t work on absolute mode anymore. Not using absolute mode kinda ruins the aspect of using a tablet and OTD is definitely better in this aspect. There is even a plugin to kill OEM drivers if you can’t get rid of em.

yeah thats what brought me here lol

I’ve got an Intuos CTL-490, I’ve always used the manufacturer driver and I’ve always wondered: is the difference really that much? should I really install other tabler drivers?
Edit: I’ve downloaded the OTD and it’s pretty amazing, so for anyone who’s wondering the same, just try.

I have the same tablet, but the manufacturer drivers are janky, it always has errors aying the side by side configuration is incorrect.

@Allan For the width and height divide by 100 the value you had in the Wacom Drivers, for the X and Y offset divide those values that you’ve just found by 2.
There’s nothing more to do, just remember to disable the Wacom drivers.
Personally, I use Width=79 Height=55 and so X offset=39,5 and Y offset=27,5

@P33P33M4N you need to be loggedi nto github to use that link, that’s something i forgot to say and i added it just now

hey Mrcubix, the downloads for the dev builds seem to be dead right now, you mind fixing them up? i wanna try out reconstuctor.

@aytrka to support the 420 and 420h rn, we need to merge hidsharp core with OTD, i don’t know the exact details of when it will be merge tho, for the osu! tablet, some may work, and some other don’t, it all depend on firmware, and / or config, give it a try, if it doesn’t work oob, come on the discord server and we’ll see what can be done

Hey I was wondering if the «osu!tablet» that it shows supported is the new or old one? Because my 420 isn’t working, and if it’s the new one, will you guys ever support the old?

Addition to fast support on Discord, these guys developing the driver are real friendly so hop on and come join us 🙂

amazing its so easy to use i was not expecting that. all the original wacom driver was not compatible anymore with my cth661 until now

one thing you didn’t mention (i think) is that devocub’s smoothing filter doesn’t work on newer versions of windows 10, so basically it’s like using a shittier version of hawku driver

Thank you, now I can play Fiery’s Harumachi Clover now!

Incorrect tablet mapping when running in fullscreen mode #12156

Comments

Moxanthia commented Mar 23, 2021 •

Whether or not I use the new tablet options available in lazer with my regular tablet drivers disabled or vice versa, the screenshot below shows the furthest point on both axes that my cursor will go within lazer. My entire screen is accessible outside of lazer using my tablet. Within lazer I can reach my entire screen using my mouse though, just not my tablet. When I Print Screen, the screenshot shows a black box around the window. This does not happen if I use Print Screen on any other window. I’m using fullscreen at my default resolution as I always have been, and screenshots worked before as normal.

osu!lazer version: 2021.323.0 on Windows 10

The text was updated successfully, but these errors were encountered:

Open tablet driver osu

System Information:

Name	Value
Operating System	Manjaro Gnome, Gnome version 3.38.3, newest Manjaro version
Software Version	0.5.0.r40.ge7bd0e5-1
Tablet	Veikk S640

Created at 3 months ago

Created at 1 year ago

After switching between fullscreen, borderless and windowed a few times it suddenly works as long as I don’t go out of the window but as soon as I go out of osu and into osu again it stops working

Created at 1 year ago

System Information:

Name	Value
Operating System	Arch Gnome 3.38.3
Software Version	v0.5.1-r0.gbccf6af
Tablet	CTH-480

Created at 1 year ago

Only happens on wayland for me

Created at 1 year ago

Odd that it only happens on wayland, since we’re using libevdev. Maybe actually a lazer and wine issue? Odds are not though

Created at 1 year ago

After switching to Manjaro with KDE, which doesn’t use Wayland, it works perfectly fine

Created at 1 year ago

Really doesn’t make sense why this only happens on Wayland, unless SDL2 is at fault here, or the Wayland implementation

Created at 1 year ago

Having the same issue on Gnome 3.38.3 with Wayland. Under X11 everything works fine.
Only lazer is affected, standard is fine on both.

Created at 1 year ago

This is now fixed with the OTD integrated into osu! Works fine on wayland.

Created at 1 year ago

Description

System Information:

Name Value
Operating System Manjaro Gnome, Gnome version 3.38.3, newest Manjaro version
Software Version 0.5.0.r40.ge7bd0e5-1
Tablet Veikk S640

Try turning off High Precision Mouse in osu settings.

Created at 1 year ago

This is now fixed with the OTD integrated into osu! Works fine on wayland.

If it is fixed the author or a member of the organization should close this.

Created at 1 year ago

Having the same issues right now on arch wayland with wine osu. Lazer works.

Created at 4 months ago

may sure the raw input is off, if this is one specific application and not everything then this isn’t an otd issue at all.

Created at 4 months ago

yep, raw input is off. And you’re right, it’s not an OTD issue. The pen input works for clicking, but not more movement. While the default kernel drivers work.
The moment I focus into the app with OTD it stops moving the pen, only registering the clicks.

Created at 4 months ago

Interestingly enough, only happens on absolute mode, artist mode works.

Created at 4 months ago

Interestingly enough, only happens on absolute mode, artist mode works.

You’re right, it works when I switch to artist mode! Thanks! I can finally play osu! on Wayland

#Support request: Huion Kamvas 13 tablet undetected #1281

Comments

Apichiins commented Jul 22, 2021

I need help with figuring out how to fix my Kamvas 13 tablet that isn’t being detected by the program, I have looked at the faq and uninstalled the drivers and used the cleanup.script, but it still doesn’t detect my tablet. Is my tablet perhaps not supported?

The text was updated successfully, but these errors were encountered:

Mrcubix commented Jul 22, 2021

Also fill the damn template

InfinityGhost commented Oct 30, 2021

Stale support request, assuming it has been resolved. This can be reopened in the case this was a mistake.

Footer

You can’t perform that action at this time.

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.

Open tablet driver osu

OpenTabletDriver/OpenTabletDriver is licensed under the

GNU Lesser General Public License v3.0

Permissions of this copyleft license are conditioned on making available complete source code of licensed works and modifications under the same license or the GNU GPLv3. Copyright and license notices must be preserved. Contributors provide an express grant of patent rights. However, a larger work using the licensed work through interfaces provided by the licensed work may be distributed under different terms and without source code for the larger work.

Permissions

Limitations

Conditions

License and copyright notice

Same license (library)

Copy raw contents

This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters. Learn more about bidirectional Unicode characters

Open tablet driver osu

Copy raw contents

Wacom Bamboo, Graphire, Intuos 1+2+3 and Cintiq 1st gen macOS driver fix

Wacom драйверы под macOS для планшетов Bamboo, Graphire, Intuos 1+2+3 и Cintiq 1st gen содержат в себе баги которые не дают им запускаться в macOS 10.15 Catalina (а так же возможно в последующих версиях macOS). Эта проблема не относится в драйверам для Windows, или к драйверам более свежих планшетов.

Поврежденный драйвер Bamboo (v5.3.7-6) подходит для следующих планшетов:

Поврежденный драйвер Graphire 1+2 / Intuos 1+2 driver (v6.1.6-4) подходит для планшетов:

Поврежденный драйвер Graphire 3 driver (v5.2.6-5) подходит для планшетов:

Поврежденный драйвер Graphire 4 driver (v5.3.0-3) подходит для планшетов:

Поврежденный драйвер Intuos and Cintiq driver (v6.3.15-3) подходит для планшетов:

К счастью, я смог отследить ошибки и пропатчил драйверы таким образом чтобы они заработали корректно!

Скачайте подходящую версию установщика для вашего планшета и дважды кликните скачаный файл чтобы запустить его- это запустит установку пропатченой мною версии драйвера Wacom:

Если появится сообщение, что ваш Mac поддерживает только установку приложений из App Store, тогда кликните по скачаному файлу правой(!) кнопкой и выберите в контекстном меню строчку «Открыть».

Прикоснитесь кончиком пера к планшету, система должна выдать предупреждение о настройке разрешений и перенаправить вас в Системные настрйоки > Защита и Безопасность > вкладка Конфеденциальность где необхожимо предоставить разрешения доступа для драйверов планшета.

Для планшетов Intuos 3 и Cintiq, драйвер может появиться только в разделе «Мониторинг ввода» (Input Monitoring), и вам возможно придется сначала перезагрузить компьютер, прежде чем элемент появится в разделе «Универсальный доступ».

Если ваша панель настроек Wacom, настройки пера или прикосновений не работают, или элементы не отображаются в списке разрешений скорее всего у вас просто остались старые разрешения от установленного ранее драйвера планшета. Эти неактуальные более записи необходимо удалить следующим образом:

Теперь либо перезагрузите компьютер, либо выполните следующие команды в терминале, чтобы перезапустить драйвер планшета. Для планшетов Bamboo и Graphire 3+4:

Для планшетов Graphire 1+2 и Intuos и Cintiq:

Эти команды должны вновь открыть диалоговый запрос на предоставление разрешения драйверам планшета. Таким образом вам необходимо предоставить разрешения снова так, как это описано в данном параграфе.

Если вам понравилось, что ваш планшето снова в деле, вы можете прислать мне чаевых!

OpenTabletDriver should not be run with administrator privileges #681

Comments

mazzu commented Jan 20, 2021

I’m on Windows and using the only user i have set up, which has administrator privileges. When opening the UI (not the daemon or the installer) I get this error «OpenTabletDriver should not be run with administrator privileges».

The text was updated successfully, but these errors were encountered:

jjhhgg100123 commented Jan 20, 2021

Send us a picture of the UAC Control Settings page, just for confirmation. It has a slider to adjust the setting.

KissMyUSSR commented Jan 20, 2021 •

Just got exactly the same problem. My UAC control settings option is «never notify»

mazzu commented Jan 20, 2021

I too have the option set to «never notify».

Changing to default fixed it, but anyway it doesn’t prompt me anything so I don’t get it. Also what if I want to leave it to «never notify»?

KissMyUSSR commented Jan 20, 2021

Yup, changing it to default fixed it but I want to keep it on never. So, could you please fix that. Very appreciated for your work.

AbstractQbit commented Jan 20, 2021

Having UAC disabled is essentially equivalent to running absolutely everything as root on UNIX-like systems. If the latter is frowned upon as being a security nightmare, why would that not be the case in Windows world?

Anyway, that error will probably get swapped to a warning in an upcoming hotfix, but you still shouldn’t have UAC disabled regardless.

mazzu commented Jan 20, 2021

In fact I was just second-guessing my choice, I don’t know enough of Windows about user permissions, also I thought that only executables which explicitly runs as admin were given special privileges, not everything. If that’s the case maybe the best practice is using a normal user on windows like it’s done on UNIX?

Anyway I digress, thank you for the awesome work!

AbstractQbit commented Jan 20, 2021 •

Back in Windows XP, if your account was an admin, everything you ran had all administrative permissions. That was a problem because people used those accounts for everyday stuff, when that was not what they were designed for.

In Windows Vista Microsoft added UAC to tackle that giant security hole. What it does is it makes a second unpriviledged account for every administrative one behind the scenes, and runs programs with it. If a program depends on administrative access, then UAC prompts user whether that program is trusted enough to be ran as admin.

By disabling that feature everything starts working the way it used to in XP days, ie really insecurely.

And yes, you are absolutely correct, having a separate user account for everyday use and elevating to admin by authenticating in UAC is indeed the safest way to use your system.

InfinityGhost commented Jan 20, 2021

FWIW, we’re gonna change this prompt just to warn users that there are potential issues with OTD by running without UAC or as an administrator.

adxv commented Feb 12, 2021

Workaround: Create a bat file with the following command:
runas /trustlevel:0x20000 C:\Users\adams\Downloads\OpenTabletDriver.Installer.exe

Footer

You can’t perform that action at this time.

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.

Add support for Huion 420 #1146

Comments

3045 commented Jun 6, 2021

Tablet Information

Name	Value
Manufacturer	Huion
Product Name	420
Width	176
Height	111
Pressure Levels	2048
LPI	4096

Diagnostic Information

I’m unsure how to get this information as I am using Linux. Please direct me on how to do so.

Additional information

I am requesting support for the Huion 420 (not H420. ) I figured it won’t be too much to add, but you never know since as far as I’m aware, the hardware for the 420 is nearly identical to the H420 (though don’t quote me on this, I do think they share the same logic board) with the difference being that the hardware buttons aren’t soldered on.

The text was updated successfully, but these errors were encountered:

Mrcubix commented Jun 6, 2021 •

good thing you’re on linux cause this tablet won’t work on windows rn,

3045 commented Jun 7, 2021

I have attached the diagnostic logs to this reply. Sorry for the delay, I was out all day yesterday.
otd-diag.txt

3045 commented Jun 8, 2021

Update 8th June 2021: I read the configuration wiki and started playing with configurations. I templated the H420X configuration, and edited some of the specifications such as report rate, vendor/product ID, device strings to be correct for my device, and now I have, at least, a semi working tablet. I’m still doing tests, but it’s looking good from what I can see and is working flawlessly. I am sure I would have made some configuration mistakes due to me being a novice in this situation, but regardless, I have attached my configuration to this reply.

Lastly, please let me know if I am updating this issue in the wrong way, if you’d rather me edit my last reply or original post, I’d by happy to do so on request.

Mrcubix commented Jun 8, 2021

3045 commented Jun 8, 2021

I have attached the string dump to this reply.

X9VoiD commented Sep 9, 2021

Footer

You can’t perform that action at this time.

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.

Very small amounts of latency #340

Comments

Navelol commented Jan 13, 2019

So I got my tablet to play Osu! and it didn’t take long for my friends to recommend these tablet drivers. When I first downloaded the drivers, they worked fine for about a month and 2 weeks. One day I noticed that my pen started to feel a little bit behind the cursor on the screen. This impacted my game play a lot and I’ve tried everything to fix, or at least find out why it’s happening. If I start up a game it works fine for about 5 seconds before having some random latency. This also happens when hovering. I’ve tried restarting the computer, changing ports for the tablet, changing Osu! settings, adding anti-smoothing, using different areas on my tablet, hovering, uninstalling and reinstalling the drivers, and even using different pen nibs. Nothing seems to work. I’ve even used the actual VEIKK S640 drivers and that seemed to fix it so I know that it’s the hawku drivers. The problem is, I like the hawku drivers a lot more than the veikk drivers so there’s nothing I can really do.

Hardware/software information

Windows Version: 10 pro 64 bit

Tablet Driver version: v0.2.3

Tablet model: VEIKK S640

The text was updated successfully, but these errors were encountered:

windows ink doesnt work #1228

Hello, I just downloaded everything and followed all the steps, and Since I’m using my tablet for both drawing and playing osu! I wanted to get windows ink plugin so I can use pressure for drawing. But the plugin even if its installed it doesnt work nor it get detected in the plugin/filter/interpolars tab. Does anyone have any ideas how to fix this?

Beta Was this translation helpful? Give feedback.

1 You must be logged in to vote

Replies

The Windows Ink plugin provides an output mode and a tip binding. You can select output modes via the dropdown (likely says «Absolute Mode») and it will show up there.

Beta Was this translation helpful? Give feedback.

1 You must be logged in to vote

I did select the windows ink absolute mode? The second time I switched I switched to windows ink absolute mode.

Beta Was this translation helpful? Give feedback.

what should I do?

Beta Was this translation helpful? Give feedback.

Send the console log here. I can’t do any further debugging without it.

Beta Was this translation helpful? Give feedback.

I just realized I have the same problem as SempaiYeet, since I installed the Vmulti extention. I’ll send the new console log.
New Text Document.txt

Beta Was this translation helpful? Give feedback.

hello? how is it going?

Beta Was this translation helpful? Give feedback.

i have the same problem and idk how to fix the thing, like absolute mode works but windows ink just doesnt pick up any movement

Beta Was this translation helpful? Give feedback.

1 You must be logged in to vote

What does your console log say? Copy it and send it here.

Beta Was this translation helpful? Give feedback.

Windows Ink absolute mode picks up movement for me and it picks up when I press down, but it doesn’t have any pressure sensitivity

Beta Was this translation helpful? Give feedback.

1 You must be logged in to vote

Send the console log.

Beta Was this translation helpful? Give feedback.

[Detect:Info] Searching for tablet ‘Gaomon 1060 Pro’
[Detect:Info] Searching for tablet ‘Gaomon M106K Pro’
[Detect:Info] Searching for tablet ‘Gaomon M106K’
[Detect:Info] Searching for tablet ‘Gaomon M10K’
[Detect:Info] Searching for tablet ‘Gaomon S56K’
[Detect:Info] Searching for tablet ‘Gaomon S620’
[Detect:Info] Searching for tablet ‘Huion 1060 Plus’
[Detect:Info] Searching for tablet ‘Huion G10T’
[Detect:Info] Searching for tablet ‘Huion GC610’
[Detect:Info] Searching for tablet ‘Huion H1060P’
[Detect:Info] Searching for tablet ‘Huion H1161’
[Detect:Info] Searching for tablet ‘Huion H430P’
[Detect:Info] Searching for tablet ‘Huion H610 Pro V2’
[Detect:Info] Searching for tablet ‘Huion H610 Pro’
[Detect:Info] Searching for tablet ‘Huion H640P’
[Detect:Info] Found tablet ‘Huion H640P’
[Settings:Info] Output mode: Windows Ink Absolute Mode
[Settings:Info] Display area: [2560×1440@ :0°],
[Settings:Info] Tablet area: [160×90@ :0°],
[Settings:Info] Clipping: Enabled
[Settings:Info] Ignoring reports outside area: Disabled
[Settings:Info] Filters: VoiDPlugins.Filter.PrecisionControl, RadialFollow.RadialFollowSmoothing
[Settings:Info] Tip Binding: [VoiDPlugins.OutputMode.WinInkButtonHandler]@0%
[Settings:Info] Pen Bindings: [0, VoiDPlugins.OutputMode.WinInkButtonHandler], [1, VoiDPlugins.OutputMode.WinInkButtonHandler]
[Settings:Info] Express Key Bindings: [0, ], [1, ], [2, ], [3, ], [4, ], [5, ], [6, ], [7, ]
[Settings:Info] Driver is auto-enabled.

Beta Was this translation helpful? Give feedback.

Get the version number of your Windows installation. Might be due to a Windows update breaking VMulti like we’ve seen recently.

Beta Was this translation helpful? Give feedback.

osu! Tablet Driver Gets rid of SHAKE

osu! The BEST Tablet Driver Ever? (OpenTabletDriver)СкачатьПодробнее

ЛУЧШИЕ ДРАЙВЕРА ДЛЯ ГП | HAWKU TabletDrivers | Установка, Решение ПроблемСкачатьПодробнее

Tablet Setup Guide for osu!СкачатьПодробнее

Reduce Your Tablet Latency! (2022 osu! open tablet driver guide)СкачатьПодробнее

Идеальный драйвер для планшета в osu! [Гайд по настройке]СкачатьПодробнее

БАН ЗА ДРАЙВЕРА НА ПЛАНШЕТ | БАН ЗА HAWKU | osu! Бан за неофициальные драйвераСкачатьПодробнее

osu! What grip should you use? | Tablet Beginners Part 1: Types of gripsСкачатьПодробнее

osu! Comparing tablet cursor smoothing!СкачатьПодробнее

graphic tablet cursor shaking fixСкачатьПодробнее

Показать панель управления

Комментарии • 423

Updated Video: clip-share.net/video/RgzkqgJ2S_Q/видео.html

To prevent the driver stopped restarting, make sure you FIRST EXTRACT ALL FILES AND THEN INSTALL VMULTI for the tablet gui to work properly. Extracting the files is important.

more tutorials like this please. you’re really good at

Thanks. I didn’t even know it existed, and it actually sets correct 1:1 with monitor, unlike official xp-pen driver (I had to manually calculate correct 1:1 values on old driver).

What do I need to instal for xd pen

i love that driver! I have an old pen and touch cth 460 (its not listed in the supported list of that driver) but i still gave it a go and its working like a charm even tho its not even supported. I can even set correct areas in mm and stuff wich wasnt even possible with the wacom drivers :O

I notice this helps a lot more with the transferring from one direction to another for better snaps. Thanks for opening my eyes brotherman. Surprised I didn’t know about this before I hit 50k lol

Thank you so much I was having trouble doing this before and you now it works! 🙂

This helped me so much thank you

Thank you soo much brother it was soo helpfull for me thanks

I love your tutorials man

gracias, me ayudaste mucho

this guy is really out here saving so much new tablet user lmao

What is it for the Desktop Size option? Because i dont know how to setup my tablet if I play on a different resolution from the default (In my case 1920×1080)

for those of you having xp-pen tablet problems, head to this link : github.com/hawku/TabletDriver/issues/602 just edit the file.cfg and paste the new config

Nice video! Keep it up.

does this driver work for virtual tablets too?

ik this is in a completely different year but can you make a separate video telling us how to connect the pen to the driver
cause my pen completely stops working when i uninstall the developer driver

tysm you helped me a lot

When I save the settings, it says that theres an error while saving and says make sure it is possible to edit and create the files. What i do

me toooo plz an answer

i have a problem, may be someone can help me.
even though i set my main monitor so i can play osu and use other programs just there, i can still go to the other monitor, like its not calibrated correctly. Due to this, the center of my tablet is like the middle of the 2 monitors and its really anoying. If someone has some advice pls help me

thanks! now i can play fps games with my table lol

is that true?what games?

Big thanks brother!

hey im having issues with my wacom ctl 4100. whenever i use hawkus driver and i adjust the input sens in osu it doesnt pick up my whole area. why might that be?

Can you make a video on how to uninstall a driver completely from your pc?

i need it too because my github is not starting

When i run the program it says successfully installed but the TabletDriverGUI.exe never appears in the file

omfg this driver saved my life

THANK U SO MUCH!

does the drivers work for mac like a download?

The drivers wouldn’t download through command prompt and said » /r install vmulti.inf pentablet/hid devcon.exe failed». How can I fix this?

all you need to do is open up the install and ENTER and it’ll install.

does anyone know how to disable the hovering?

when i download the zip it downloads a folder not a zip file, even tho i could open the driver my tablet wont work. please help

Is it normal that I need to keep the tab open for it to work?

I hover and I noticed that when using this program, my cursor shakes A LOT.. Any fixes?

Thanks. Very nice.

I have XP-Pen G640 and I download this driver but my tablet doesn’t work with this driver, what can I do?

but when i want to use the tablet for writing and other stuff shouldnt i be using the wacom driver?

you jst saved my day ty xD

What would happen if i uninstalled the wacom drivers and installed this custom one and then install the wacom drivers back again?

nothing just makes sure to delete any old drivers when you are installing the old ones back there steps to correctly uninstall the hawku drivers

everytime i hit restart driver it brings up an error in the console that says that it cant open XP-Pens VMulti anyone know a solution?

I’m watching this, and I don’t even have my tablet yet

Getting mine this week

getting mine today or tommorow

Getting mine today 🙂

@TOOASIAN_FORYOU me too

I have a problem. My tablet driver makes the top of my tablet the middle of my screen. I don’t understand why it is doing this or know how to fix it and I have messed with it a lot. do you know the fix?

do i need to unistall the stock driver?

Aside from the customization, how is this better than the xp pen drivers for the g640? I’m afraid it will kill my speed and irk how I would transfer over my area.

mine dosent show apply and save it just shows save setting and when i press it it says error occured

Is there any way i can use the driver on linux

how can i disable windows ink in this driver? i’m having trouble with raw input

Im cth 680 and i like the hawk driv

i followed everything but when i launch the tablet driver gui.exe it crashes. white screen while the mouse is rotating and after that it says tabletdrivergui.exe has stopped working. need help

anyone know how to fix a problem with installing hawku drivers on xp-pen g640s. I uninstalled the drivers for the xp pen, ran the hawku driver, still doesnt work. i tried restarting and everything and i cant see to find a fix to this. if you have a solution please reply to this comment.

The program deleted itself when I started up my PC. I tried to redownload it and the application is no longer there. What should I do?

do you have another driver installed?

what about the thing u did some time ago with the latency to increase polling rate? cuz now i told to not change that.

I know I’m super late, but will these drivers hinder my digital painting experience? I’ll find out eventually, but I still would like to know before I uninstall my Wacom drivers.

i need an answer too

Idk why the console keeps saying that it stopped working. Like I’m pretty sure I deleted all old files for the Tablet setup. Do you know any solutions?

Can I also use this Driver for drawing?

Yes, but these drivers are only for osu! you should download normal drivers so you can get that pen pressure thing as well.

Guys idk whats up but when i am in the thing on the bottom he connects his tablet and it shows up but mine doesnt do that. Mine says :driver stopped, restarting, check console. Does anyone know what that means like did i do something wrong IDK

Can this remove the smoothing on the g640 rev b, or at least make it better, im looking for a tablet good for drawing and for osu so i dont know if i should get this or the veikk.if i can remove the smoothing i will prbly get the g640 but if nah veikk it is

the smoothing is on the hardware level and you can’t change that. Sorry.

I have the wacom ctl 472 and everytime I open the hawku driver I can’t move the cursor with my pen but its working please someone help

Why am I unable to save my settings? I get an error when trying to

i need some help, the thing placed on the bottom is just save settings how do i fix this

Help when i press save settings it says an error occured while saving the configuration. Make sure that it is possible to create and edit files in the.. blah blah

when i install it the driver gui doesnt have the smoothing filter, button mapping, desktop size, wacom etc

Maybe u downloaded an older version
well its been 3 months since you commented this and I suppose you have already fixed it

I have deleted my Wacom drivers off my computer but for some reason, it’s still installed and running somewhere on my computer. This negates what I put onto the custom driver and just makes it a normal tablet, so I can’t change the area size of the tablet. Can someone please help so I can use the custom drivers instead of Wacoms?

@Jaeky Thanks, that worked!

Type «Device Manager» in your start menu and find the wacom driver while your tablet is plugged in. Right click on it and click uninstall device.

I choose my main desktop and it only lets me use half of the screen how do I fix this

on step 4 i dont have the install file after I’ve un zipped it

Is this compatible for all tablets?

does anyone know if this still works? i keep getting «check tablet, tablet not found» error in console

I don’t think these drivers are compatible with all tablets

How do you setup a driver for gaomon s620?

Do you still need your previous driver?? I tried this with my wacom one ctl-671 but it didn’t connect to my wacom?

@Jaeky my pen is not working even though it says its connected and working fine

No, you need to make sure that you uninstall your old driver or else this will not work. Make sure to read the instructions on the GitHub.

my cursors block at a certain point and I can go on all thez screen can you help me?

CTL-480 and CTH-480 are the same size, the only difference between the two is that one has an eraser and touch features, so it shouldn’t be an issue. That’s weird that its recognizing it wrong though. Make sure you uninstalled all of your old drivers.

Can someone help me? My screen map isn’t lined up properly. There is still a little bit of white showing on the screen map instead of grey

for some reason when i try to click the download link it does not download

If you guys have an XP-Pen G430s it doesn’t work, go to the config file, and go to tablet.cfg and replace everything in the cfg with:
HIDTablet 0x28BD 0x0913 0xFF0A 0x0001
CheckString Product «4 inch PenTablet»
Name «XP-Pen G430S_B»
ReportId 0x02
ReportLength 12
DetectMask 0x80
MaxX 10160
MaxY 7620
MaxPressure 8191
Width 101.6
Height 76.2
#InitReport 0x02 0xB0 0x02 0x00 0x00 0x00 0x00 0x00

Jaeky back again!

Do u guys know any drivers that support the Veikk VK640?

if i save my settings and restart my computer every setting is resetted. My tablet area gets reset too

does this work with windows 11?

I clicked the download link but It does nothing.

i have an adesso graphics tablet what do i do about that?

when i move right it goes left and left goes right, up and down is correct

Turn your tablet upside down, your welcome

my tablet detects my pen but there’s no input. i use cth490

i am using a Veikk s640 tablet. does this support it?

The Driver cant find my Tablet: H430P but it is supported

@Tuấn Lương Ngọc yeah i did get the rev b model, my friend told me about it not long after i commented xd

@Lewi ST i think you got the rev b version

@Branshi there is a solution just install the huion drivers and the drivers for Wacom

Make sure to click restart driver at the bottom right of tablet driver

Can somebody help me? This does not work for me.. It seems like the drivers dont find my tablet, since it says that it’s restarting the problem all the time. I uninstalled my old drivers but it still dosent work for some reason. I checked the logs and it says that I should uninstall any other drivers and end other driver programs, but I’ve got neither of those.

Yes I do and it ended up working! I installed the drivers again and uninstalled them and It worked. I also changed the usb slot

Logs: 2018-09-10 21:18:58 [INFO] >> Start
2018-09-10 21:18:58 [ERROR] Tablet init failed!
2018-09-10 21:18:58 [ERROR] Possible fixes:
2018-09-10 21:18:58 [ERROR] 1) Uninstall other tablet drivers.
2018-09-10 21:18:58 [ERROR] 2) Stop other tablet driver services.

how do i tell if its working or not?

hi i know im 2 years late, but i recently got a second monitor and it is set up vertically. this seems to mess up hawku drivers and its just not right.

It doesn’t work. It has no errors. But when I put my tablet area it doesn’t correctly put it

bro, i can’t find the install_vmulti_driver.bat. I only see install_vmulti_driver and the same thing with a 32 at the end. Then i see a remove then a remove wit a 32 at the end.

i’m having trouble with my drivers it keeps saying drivers stopped and it won’t work

im using huion hs64 table and the cursor shake is massive
i need this but it dont support the tablet i use

You have a serious error, your area is very small, at least put a 100 mm and 3 ms because without MS it is very uncomfortable to play

@Jaeky In a big area the ms does not matter
mmmm except for Varvalian

[confirmed] Windows 10 Creator update Cursor & Raw Input issues.

Нет аккаунта?

[confirmed] Windows 10 Creator update Cursor & Raw Input issues.

If you are using the latest Windows 10 «Creators» update, then you most likely are experiencing an issue with your Tablet peripheral not working as intended, or your cursor being stuck in the top left of your screen.

This seems to be an issue with Windows Ink & Raw input in the latest Windows update, as having Windows Ink and or Raw input enabled causes the cursor to not work for most.

For Wacom / Huion H430P / Gaomon S620 Tablet Users, there should be a checkbox in your Tablet Driver settings to disable / enable Windows ink. You want to uncheck it.

For Wacom tablets, it is located in the Mapping section of your drivers:

For the Huion H430P and Gamon S620, it is located in the Digital Pen section of your drivers:

For Huion (excluding the H430P) or other Tablets, Please check for a «Support TabletPC» option or checkbox, disable it.

If the driver you are using does not have a checkbox toggle, you may have to follow the steps in the below box named Secondary Method. Just note, this will probably only work with very rare or outdated drivers / tablets. Please look for a Support TabletPC toggle instead. Or install the latest drivers.

Visual Representation courtesy of of pasi123567

If you don’t have a Huion tablet, I’m sure the procedure should be similar. If you can’t figure it out. Try Googling your Tablet and seeing if you can’t find out the info there.

These «luckily» seem to work a good Majority of the time. If none work, please check the replies to this thread for any other potential fix. It’s also possible your issue is caused by something else, and not this one specifically.

Do remember that having your sensitivity set to anything not 1x will force Raw Input, and so you will have to set your sensitivity to 1x.

If this messed up your Tablet Area, please change the active area in your Tablet Driver Settings instead of using Sensitivity ingame.

This thread serves to show this is a known current issue. Please do not post in this thread unless you have found another Workaround or «Fix», and or have some information that could be useful to this issue.

DO NOT BUMP THIS THREAD WITH «Thanks», «same», or «I have this issue too and none of the fixes work « If none of the fixes work, you can try making a new thread, as it’s possible this is not your issue.

Curse you Windows 10.

Locked to prevent nonsensical replies, as the Information is still current as is THE FIX for the issue. If you still have trouble after attempting these steps, make a new thread.

/ TabletDriver

Это драйвер графического планшета с малой задержкой, который предназначен для использования с osu ритмической игры!

В настоящее время драйвер работает только при работающем графическом интерфейсе TabletDriverGUI.

Графический интерфейс сворачивается в системный трей/область уведомлений. Вы можете повторно открыть графический интерфейс, дважды щелкнув значок на панели задач.

Если у вас возникли проблемы с драйвером, прочтите FAQ:

https://github.com/hawku/TabletDriver/wiki/FAQ

Загрузить

http://hwk.fi/TabletDriver/TabletDriverV0.2.3.zip

Поддерживаемые операционные системы :

Поддерживаемые планшеты:

Настроен, но неправильно протестировано:

Установка

Возможно, вам потребуется установить эти библиотеки, но обычно они уже установлены:

Распаковать драйвер в папку (Sho Рекомендуется использовать путь rter, например C:TempTabletDriver )

Удалите все остальные драйверы планшета. Если у вас возникли проблемы с удалением драйверов Wacom, проверьте проблему GitHub №1

Запустите TabletDriverGUI. exe

Обновление до новой версии

Удаление

VMulti и Huion двоичные файлы драйверов

Если вы хотите скомпилировать код и не хотите устанавливать что-либо из двоичного пакета TabletDriver, вам потребуется извлечь недостающие драйверы из этих установочных пакетов:

Драйвер VMulti:

Драйвер Huion WinUSB:

Журнал изменений

v0.2.3:

Tablet init failed! Xp-Pen G640 #756

Comments

IGuiqik commented Aug 6, 2020 •

Hardware/software information

Tablet Driver version:

Tablet model: Xp-Pen G640

I dont have any other drivers on my pc. pls help

The text was updated successfully, but these errors were encountered:

Acro13 commented Aug 6, 2020

I’m getting the same issue. I bought my G640 2 days ago and my computer isn’t, 1, picking up the tablet and 2 when I do have the tablet plugged in the osu drivers don’t work. I’ve tried various different methods. such as having the XP-pen drivers installed which creates the result below. Or not having the XP-pen drivers install and getting no device connected prompt

Acro13 commented Aug 10, 2020

Hello i found a solution

Go to the tablet drivers folder

Config
tablet.cfg open in a file editor such as Notepad++
find XP-Pen G640
replace code with HIDTablet 0x28BD 0x0914 0xFF0A 0x0001
#CheckString Manufacturer «XP-PEN»
#CheckString Product «6 inch PenTablet»
Name «XP-Pen G640»
ReportId 0x02
ReportLength 12
DetectMask 0x80
MaxX 16000
MaxY 10000
MaxPressure 8191
Width 160.0
Height 100.0
InitReport 0x02 0xB0 0x04 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

Aiko-bop commented Aug 11, 2020

Add artist mode for Windows #1230

Comments

UlyssesZh commented Jul 1, 2021

The official Wacom driver for Windows offers an option not to use Windows Ink but it can still provide pressure. I think there should also be an artist mode in OTD for Windows that does not have anything to do with Windows Ink. Using Windows Ink will lead to too many side effects.

The text was updated successfully, but these errors were encountered:

AbstractQbit commented Jul 1, 2021

Wintab is is an ancient API and an absolute nightmare to implement. Really doubt it will ever be supported.

adryzz commented Jul 1, 2021

Wintab is is an ancient API and an absolute nightmare to implement. Really doubt it will ever be supported.

And it would also 99% require you to add a DLL library in your drawing software or in system32 (unless we use Wacom’s, which is of course undocumented too)

fredemmott commented Mar 4, 2022

Is there an alternative API/output mode that applications could be modified to use to get data from OpenTabletDriver, without going via windows ink or mouse emulation?

From a brief look, it seems that this is possible to add, but would need a new plugin to be written first to add this functionality?

jamesbt365 commented Mar 4, 2022

This issue is on about adding wintab support.

fredemmott commented Mar 4, 2022

Sorry, split to separate issue.

Footer

You can’t perform that action at this time.

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.

how to install it about OpenTabletDriver HOT 6 CLOSED

yes i am stupid

Comments (6)

Download the driver, extract it to a folder, and open the OpenTabletDriver file inside.

meowzy0 commented on May 22, 2020

but after that my cursor is not moving

skyborgff commented on May 22, 2020

Disable raw input in osu!

meowzy0 commented on May 22, 2020

i mean it is not working even on my desktop

skyborgff commented on May 22, 2020

could you join the discord so we can troubleshoot?

Mrcubix commented on May 24, 2020

Kill OEM drivers if there are any active in the task manager as well as other program related to tablet settings, then go in OTD to «tablet» > detect tablet and you tablet name should show, if that’s not the case, then there is a driver issue on your part

Related Issues (20)

Recommend Projects

A declarative, efficient, and flexible JavaScript library for building user interfaces.

Vue.js

🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

TensorFlow

An Open Source Machine Learning Framework for Everyone

Django

The Web framework for perfectionists with deadlines.

A PHP framework for web artisans

Bring data to life with SVG, Canvas and HTML. 📊📈🎉

Recommend Topics

javascript

JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

Some thing interesting about web. New door for the world.

server

A server is a program made to process requests and deliver data to clients.

Machine learning

Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

Visualization

Some thing interesting about visualization, use data art

Some thing interesting about game, make everyone happy.

Recommend Org

Facebook

We are working to build community through open source technology. NB: members must have two-factor auth.

Microsoft

Open source projects and samples from Microsoft.

Support request for serial Wacom tablet GD-0608-R #1390

Comments

vancho1 commented Sep 4, 2021 •

The text was updated successfully, but these errors were encountered:

Kert commented Sep 4, 2021

Since no one replied yet
Does the tablet appear normally as a regular usb device when you use the converter? I am not sure but you can probably make a configuration file similar to other ones with correct VendorID/ProductID e.t.c.
I am suggesting this because probably you won’t find another person here with a serial tablet

gonX commented Sep 4, 2021 •

gonX commented Sep 4, 2021

Reading some other contributors thoughts on the Discord made me realize a USB adapter would likely just present itself as a serial port, which the driver does not support yet. A diagnostics log from OTD would answer whether this is the case.

If you or anyone else plans to implement serial support, please join our Discord first, since it requires quite extensive backend changes.

vancho1 commented Sep 4, 2021

Reduce Your Tablet Latency! (2022 osu! open tablet driver guide)

Reshiver

feel free to comment if you have any problem and im sorry for the thumbnail kekW 🙂

Is there a way to keep your regular wacom drivers as well, since I use my tablet for drawing as well

how did you make your windows home screen look like that?

it keeps saying i need to install missing frameworks but ive done it multiple times

nigga u cant be talking bout mf latency nigga when you got da custom logos, animated background, world of world craft open, aspect ratio on, nigga. what da hell?

I have the same tablet as you but the driver ain’t letting me save/apply the changes. Any idea? its detected and all

do I have to uninstall wacom drivers while using this or is there a way to disable them? ty

I have an S620, and its not detecting the tablet. Do you know a fix for this situation?

InfinityGhost / OpenTabletDriver Goto Github PK

Open source, cross-platform, user-mode tablet driver

License: GNU Lesser General Public License v3.0

C# 99.80% Shell 0.20%

OpenTabletDriver’s Introduction

All statuses of tablets that are supported, untested, and planned to be supported can be found here. Common issue workarounds can be found in the wiki for your platform.

Running OpenTabletDriver binaries

Building OpenTabletDriver from source

The requirements to build OpenTabletDriver are consistent across all platforms. Running OpenTabletDriver on each platform requires different dependencies.

No other dependencies.

Required packages (some packages may be pre-installed for your distribution)

To build on ARM linux, run the provided ‘build.sh’ file with the appropriate runtime provided as an argument. For arm64, this is ‘linux-arm64’.

No other dependencies.

Contributing to OpenTabletDriver

If you wish to contribute to OpenTabletDriver, check out the issue tracker. When creating pull requests, follow the guidelines outlined in our contribution guidelines.

For issues and PRs related to OpenTabletDriver’s packaging, please see the repository here.

For issues and PRs related to OpenTabletDriver’s web page, see the repository here.

Supporting a new tablet

You’re also of course welcome to open a PR adding support for it yourself, if you have a good grasp on what’s involved.

Generally this process is relatively easy, especially if it’s for a tablet manufacturer we already have support for on other tablets.

Discussions: OpenTabletDriver/OpenTabletDriver

Use alt + click/return to exclude labels.

Discussions

1 You must be logged in to vote

Make It Easier to Toggle Between Windows Ink and Aboslute Mode

1 You must be logged in to vote

32 bit PC’s

1 You must be logged in to vote

Custom pen buttons in windows ink mode

2 You must be logged in to vote

Option to register daemon as a service

1 You must be logged in to vote

Can add Dark theme?

7 You must be logged in to vote

Windows start daemon only (no GUI) at startup

1 You must be logged in to vote

Can you minimize OpenTabletDriver.Daemon.exe to the tray somehow?

1 You must be logged in to vote

Absolute setup with Relative cursor

1 You must be logged in to vote

Macros and Pen Pressure Multiple Inputs

1 You must be logged in to vote

Activate barrel button binding on tip pressure

1 You must be logged in to vote

Adding hawku anti-smooting filter

1 You must be logged in to vote

Mouse scroll binding

2 You must be logged in to vote

Processing pipeline overhaul

1 You must be logged in to vote

OTD Install/Portable Experience

Footer

You can’t perform that action at this time.

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.

How to Play OSU with Tablet: Exact Guide

Many of you people are clueless about how to use OSU tablet! Also, there are very few reference guidelines available on the internet. That is the primary reason why confusions are at their peak. In this article, I will tell you how to optimize all settings and other essential setups of your newly bought tablet for OSU.

Before you start learning about OSU tablet drivers and OSU tablet tips, make sure that you don’t have any default settings. Sometimes, the old settings are not preferable and eventually going to irritate you. In this article, I will show you how to set up Huion H420 or any other tablet for OSU and how to play OSU with the tablet.

How to Play OSU with Tablet

Step 1: Get the Drivers

Let’s start with getting the drivers for your tablet. You know, whenever you buy any tablet or cellphone, you are supposed to have drivers that you need to install. These drivers generally come in a disc with the package you have bought. But, if you didn’t get them in your kit, you can also buy them online. It is a personal choice, but if you ask the experts, they always suggest to download the relevant drivers from the internet.

To get the drivers, you can go to the brand’s website. For example, if you have a Wacom tablet, it is preferable to visit the site of Wacom. If you are unable to find the drivers on the website, then you can try other drivers and see if they work best for your tablet or not! Generally, there are no such issues with any drivers. So, go to Google and type the brand’s name on the search bar. You will see that the search result contains ‘Tablet Drivers.’

Once you click on the link, it will redirect you to the website of the company. There you will find the models of your brand’s various tablets. Select the model number/name of the tablet you are using right now and check the OS. Once you have read and referred everything, press ‘Download’. Save the location or go to the ‘Downloads’ to find the recent drivers.

Step 2: Run the Setup

After downloading, you can run through the setup. It usually requires to reboot your computer to process all the changes. Once you reboot the system, you will have all the drivers. Then, find something like ‘Wacom tablet properties’ (I have taken Wacom as an example, and that’s why I am continuing with it. You have to type your brand’s name and find for the properties.)

Note: Here, always remember that, whenever you use your tablet & click on something, it’s going to have a ripple effect, and it’s going to be really weird. But that’s quite normal. So, don’t worry about it.

Going further after properties, use a program called ‘Debug.’ You can also download it and run it. This function will help you to convert all the harmful programs of your tablet into the good! But, if it gives you the error or not turning to the right, it is possible that your screen starts blinking three to four times. Then, run it as an administrator and make everything okay and refresh the status just to be sure.

By following the above procedure, you will see that the flicks and everything will be turned off for you. Also, there is a manual way to do it, and you can get it on the website. But according to me, the way I have mentioned here is the easiest way to do it.

Note: One thing to understand is that when everything goes wrong, that means that all the programs, on-screen controls, and setting options of the tablets are disabled. You can either make them able or delete all of them entirely or tuck them into a folder. That doesn’t really matter.

Step 3: Check the Updates

After that, now you should open up the Wacom tablet properties. Obviously, if you have a different kind of features, you will have various software for it. In the Wacom, you will get a desktop center, and it launches every time I turn on the computer. But, you should always run through it once and make sure that you don’t have any new updates. You guys can also backup your settings to the clouds. So in case, you lose your settings, you can restore them back to the computer.

Step 4: Set the Tablet Properties

Go into your tablet properties and make sure that you have OC running. Sometimes, it doesn’t have to be running, and then, you just have to go to the ‘plus’ icon. If it’s running, you guys can select it from the options or browse and find OSU. All the buttons you see on the top of your tablet, I recommend disabling all of them to avoid pressing them accidentally while playing.

Step 5: Pen Settings

Moving over to the pen, it does not affect anything unless you drag. If you have buttons on your pen, you should make them disabled. It’s because you don’t want to click something randomly, right? Opposite to this situation, if OSU tablet cursor stuck in the corner, then you can use the pen’s buttons and get your job done.

Step 6: Mapping

In this whole process, one of the essential things is Mapping. OSU tablet area size is what a lot of people get confused about and what they look around for! The tablet area is an entirely personal choice and can be changed according to different preferences.

But, there are a couple of things you may want to know that you should not have your tablet area too small as it can provide you a lot of speed but lack of accuracy. Also, it should not be too big as it goes really hard on the wrist. One more thing you should keep in mind is choosing a useful mode. Select the pen mode and not the mouse mod. Also, choose ‘full’ on the screen area if you have one monitor and select the tablet area as per your preference.

Step 7: In-game Settings

The settings mentioned above are the most important ones which you really need for your tablet. Apart from that, there are some in-game settings you need to check according to your convenience. Go through them once, take the help of our other articles, and try to fix each and everything that can help you to smooth the procedure.

So finally, you are entirely ready to rock. I hope this easy step by step guide will help you to fix all of your queries on how to play OSU with a tablet. Enjoy this freeware rhythm game thoroughly without compromising OSU tablet sensitivity. I hope you all get a high score to prove your status. Happy gaming!

Add support for Acepen AP 1060 #591

Comments

Custard7A commented Dec 28, 2020

Tablet Information

Name	Value
Manufacturer	Acepen
Product Name	AP1060
Width	10 Inches
Height	6 Inches
Pressure Levels	8192 Levels
LPI	5080 LPI

Diagnostic Information

The text was updated successfully, but these errors were encountered:

X9VoiD commented Dec 28, 2020 •

Make sure you are logged in to Github and then download latest OTD dev build.

Extract the zip to any folder of your choice. Uninstall your previous OTD and delete %localappdata%/OpenTabletDriver/settings.json if it exists.

Redo the diagnostics using the OTD dev build so we can ease the process. The latest dev builds tells us which devices OTD are allowed to access. This bit is not available on 0.4.2 diagnostics.

Custard7A commented Dec 29, 2020

Ok, the app reporting as v0.5.0 now.

X9VoiD commented Dec 29, 2020

Download and extract AP 1060.zip as Configurations\Acepen\AP 1060.json

Restart OTD and see if it detects properly. Most of the contents of the config are dummy values for now and is made just for the sake of detection. Those values will be updated later once we got it detected in OTD.

Custard7A commented Dec 29, 2020

The «No tablet detected» message is gone and replaced by a representation of the tablet’s area.

Under the Console tab in the log it includes:
[Detect:Info] Searching for tablet ‘Acepen AP 1060’
[Detect:Info] Found tablet ‘Acepen AP 1060’

When using the tablet to move the cursor around the cursor is the diamond dot, as it was before.

The Tablet Debugger window offers no data so far, when manipulating the tablet or otherwise.

X9VoiD commented Dec 29, 2020

I see, I’d recommend you join the discord server. We will continue there, as the next steps require a lot of interaction. Or you may opt to not to and continue here instead.

Custard7A commented Dec 30, 2020

I have a fresh Windows PC that has been assembled newly this very month, and has not yet seen any real service. Theoretically a perfectly clean test-bed, but I began by attempting to verify that.

So then running OTD; In short, it acted the same as left off on the other system. The interface responds to the tablet being there as if it is detected, and the cursor also changes from the diamond dot to the typical arrow pointer when using the tablet. However, the Tablet Debugger remains blank in all fields at all times, changing the size of the tablet area then pressing Apply had no effect, neither did attempts to change to Relative Mode, and pressure was working in both Photoshop and Krita without any plugin added to OTD.

grandamariusz/osu-wacom-linux

Use Git or checkout with SVN using the web URL.

Work fast with our official CLI. Learn more.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching Xcode

If nothing happens, download Xcode and try again.

Launching Visual Studio Code

Your codespace will open once ready.

There was a problem preparing your codespace, please try again.

Latest commit

Git stats

Files

Failed to load latest commit information.

README.md

Wacom area setting utility for osu!.

This little script calculates and sets tablet’s area for Wacom tablets automatically, given four parameters.

It disables any smoothing by default.

Example use: python owl.py 50 75 75 n

Make sure to install xf86-input-wacom and xorg-xrandr before running the script.

How to execute the script

Clone the script into your home directory:

git clone https://github.com/smokepenguin/osu-wacom-linux

Finally, run the script using:

About

Wacom tablet area utility for osu! videogame, written in Python.

Gaomon S620 not connecting about OpenTabletDriver HOT 1 CLOSED

Description

Hi, I need some help. I play osu! and i had a friend recommend this driver for me to use, it worked for a little bit but then all of a sudden my tablet (Gaomon S620) wouldn’t connect to it. no matter how many times i unplugged it or restarted my pc. i have winusb and have tried literally everything

System Information:

Name	Value
Operating System	Windows
OpenTabletDriver Version	0.5.3.3
Tablet	Gaomon S620

Comments (1)

https://github.com/X9VoiD/WinUSBCleanup/releases/tag/v1.0
If not check the cable, if still not you deleted the config folder. Also fill out the template

Related Issues (20)

Recommend Projects

A declarative, efficient, and flexible JavaScript library for building user interfaces.

Vue.js

🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

TensorFlow

An Open Source Machine Learning Framework for Everyone

Django

The Web framework for perfectionists with deadlines.

A PHP framework for web artisans

Bring data to life with SVG, Canvas and HTML. 📊📈🎉

Recommend Topics

javascript

JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

Some thing interesting about web. New door for the world.

server

A server is a program made to process requests and deliver data to clients.

Machine learning

Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

Visualization

Some thing interesting about visualization, use data art

Some thing interesting about game, make everyone happy.

Recommend Org

Facebook

We are working to build community through open source technology. NB: members must have two-factor auth.

Microsoft

Open source projects and samples from Microsoft.

[HowTo] Use your Samsung Galaxy Note as a Tablet for osu!

Нет аккаунта?

[HowTo] Use your Samsung Galaxy Note as a Tablet for osu!

Many people want to try to play with a tablet at least once, but just for trying, tablets are a little bit expensive. So why not buying a Samsung Galaxy Note 3 for 450€ to try it?

Okay, just a joke ^^ In this Guide I’ll show you how to use your Samsung Galaxy Note Device (you know, these things with the S-PEN) as a Tablet for osu!
The Device itself is a small Wacom tablet, with a Wacom digitizer (at least the one in my Note 3 is from Wacom)

Okay, now what you need:

-Wi-Fi OR a rooted device to do reversed tethering (ask google for it; not tested yet)
— (and as you can guess it) Your Galaxy Note Device with the S-PEN

The VirtualTablet App on your phone:

Next, you’ll need the Server for the PC:

Okay, now install all the things (that shouldn’t be very hard )

After that, you should open the program, and it should look like this:

For me, the Auto Discovery in the App is not working, so we’ll have to enter our IP on your own (maybe you’re lucky and can skip this step)

Also the Program shows me the IP of my Hamachi network adapter, so just for people, that don’t know how to find out their local ip:

Enter «ipconfig» (without the «»)

Scroll up to the top. There should be your primary network adapter.

Look under IPv4-Address or something like that

BOOM! There you go

On your Mobile Device, you go like this:

And then Press Connect

Next, look at the explanation of the gestures, because they’re really usefull.

In osu! itself, just turn off «Raw Input»

And there you go

Just a few things:

— Turn off Sync and kill things like WhatsApp, because it can get laggy, if theres network traffic
— Hovering only works if you touch the screen using the pen once. So if you get out of range, you’ll have to touch the screen with the pen once again (Hopefully, that’s a bug that can get fixed)
— THIS THINGS USES BATTERY LIKE IT’S AIR! So just do a force stop after using it. Also, you can connect your Phone to USB or AC while you’re playing
-Try keep the pen near your screen when hovering, because the range is very limited. If you don’t do, it’ll lag
-Also do not expect as a replacement for a real tablet, because there are some issues (like the hovering thing). But just for fun, it’s really good

Video of me playing with this thing:

Hope you like it

ความคิดเห็น • 423

Updated Video: th-clips.com/video/RgzkqgJ2S_Q/วีดีโอ.html